Friday, August 30, 2013

Xenda Universal Charging Car Mount Phone Holder with Dual USB Ports and Charger Socket for Samsung Galaxy S3 S 3 III, Iphone 4 / 4S / 5, Galaxy Note, Note 2 II, HTC Droid DNA, Motorola Droid Razr M, Blackberry Z10 / Q10, HTC Windows Phone 8X / 8S

Bargain Xenda Universal Charging Car Mount Phone Holder with Dual USB Ports and Charger Socket for Samsung Galaxy S3 S 3 III, Iphone 4 / 4S / 5, Galaxy Note, Note 2 II, HTC Droid DNA, Motorola Droid Razr M, Blackberry Z10 / Q10, HTC Windows Phone 8X / 8S


Car holder and dual charger for most smartphones. Flexible Arm. Overcurrent protection High-quality PC + ABS Material. Non-slip feet keep the phone stable in the bracket. Modern design with adjustable gooseneck rotation of 360 degrees. NOTE: USB CABLE or CAR CHARGER ARE NOT INCLUDED.
  • XENDA(TM) UNIVERSAL CAR MOUNT. Car holder and dual charger for most smartphones. Adjustable swingable joint for better angle control.
  • Flexible Arm. Over charging protection High-quality PC + ABS Material.
  • Non-slip feet keep the phone stable in the bracket. Modern design with adjustable gooseneck rotation of 360 degrees.
  • Adjustable to fit most sizes of smartphones. Adjustable cushioned arms to hold virtually any phone and GPS devices securely.
  • Dual USB car charger (5V, 2A) with high efficiency. LED Power indicator. NOTE: USB CABLE or CAR CHARGER ARE NOT INCLUDED.

This Car Mounts give to us some advantages, like this :
1. Stopped working after 1 week
I used this for one week and the charging socket stopped working. I'm on the road a lot and this looked like a helpful accessory. However, it was a total waste of money since it only worked for one 4 hour trip and then the charging socket stopped working! I can't even use it as a holder, since I need to have a good charger in the cigarette lighter slot.
I highly recommend you do not waste your money on this!

2. Do not waste your money!
Bought this in hopes of finding a holder that would work for both my phone and my wife's. I have the Galaxy Note 2 and my wife has the Galaxy S3. The holder opens up wide enough to hold either phone, however when you close the holder tight to hold the phone it only stays tight for a few seconds then it slowly opens back up. Not very useful if I have to keep one hand on it to keep my phone from falling out of the holder. The support arm is also a little on the wobbly side, it moves around. This is just not worth the money or aggravation.

Need more appointment... ?
This is a great product
I love the design and how this works. The only problem I had is it can be a little top heavy and when you make a slightly hard turn the phone kind of turns down. I was able to take a coat hanger and make a tie to the dashboard that keeps it in place. ( It does not look like a quick fix.. hehe It acts as a stabilizer and keeps it from sliding down)
More information by clicking here.

Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for iPhone 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 BlackBerry Z10 Q10 HTC ONE DROID DNA Samsung Galaxy Note 2 II

Deals for Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for iPhone 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 BlackBerry Z10 Q10 HTC ONE DROID DNA Samsung Galaxy Note 2 II


Phone Holder Series provide safe and secure solution for your PDA Smartphone or any handheld, devices. Slide arms of the holder can be adjusted for universal fitting of a desired device. A USB charging port allows you to charge your device, getting rid of need for a separate car charger. It plugs into any cigarette lighter or 12-volt power receptacle and tightens instantly with a clockwise turn. The neck, made of flexible aluminum, can be adjusted to optimize viewing.Cigarette lighter car phone ...
  • Fonus Universal Car holder with charging usb port for most smartphones. Adjustable to fit most smartphones. Flexible long neck can be twisted and bended to position the holder at easy to reach positions.
  • Modern design with adjustable gooseneck. Holder rotates 360 degrees. USB charging port with high efficiency. Flexible goose-neck arm.
  • Able to connect adapter through lighter socket connection (12/24V DC). Phone can be used during charging. USB Cable sold separately and NOT included.

This Car Mounts give to us some advantages, like this :
1. Universal Car Mount on Lighter socket dock
Works great. I have an older model car (1998 to be exact). Tested it on the Galaxy S3 and hubby is satistied with his Father's Day gift. If you have a heavy cellphone cover, it may cause it to need adjustment before you place them on. Weight plays a roll but it works also on my Note 2. Thank you.

2. It works - but with issues
it does the job. Acting as a holder and a charger is nice. But there are a couple of pitfalls, one of them rather significant for me. While the hold on the lighter connection is fairly tight, it's not as tight as it could be. I understand there are options out there that allow you to turn a screw to tighten this area. This does have a screw tightener but it doesn't handle this spot, rather it tightens the connection higher up where the holder attaches to the snake cable. The more significant issue for me is that the red led light never goes out, or at least not that I can see. If your auto provides power to the lighter without the key in the ignition (mine does) the red led light will continue to glow when you get out of the care and, presumably forever ... or until it eventually empties the battery. I suspect the battery drain is very slight ... but still - why would you want that at all. I will continue to use it but I will remove it from the lighter connection each time I...

Need more appointment... ?
JUNK!!!!
This item is JUNK. Don't waste your money. I used it for about a month and at first it seemed like it might be ok but then the thing fell apart. It would not stay in the lighter and then finally the metal end of the charging insert just came right off. I don't usually do reviews but I couldn't let this one go.
More information by clicking here.

Thursday, August 29, 2013

Mivizu Universal Windshield/Dashboard Car Holder Cradle for iPhone 5, Samsung Galaxy S3, S2, Note 2, Motorola Droid Razr HD Maxx, iPhone 4s & Vent Mount

Cheapest Mivizu Universal Windshield/Dashboard Car Holder Cradle for iPhone 5, Samsung Galaxy S3, S2, Note 2, Motorola Droid Razr HD Maxx, iPhone 4s & Vent Mount


At last, the best car dash mount is here. Mivizu has the newest, most functional car mount for your handheld device, to keep you hands-free (and ticket-free!) during driving. This Universal Car Mount System is the most convenient way to easily keep your electronic devices within reach. Adaptable with almost all cell phones, GPS devices, PDA's, and MP3 players, this extremely portable accessory uses a simple yet strong suction-cup foundation to create a sturdy mounting base. Mount's viewing angle...
  • Compatible Models: All types of handheld devices between 4.0-9.0cm (1.5-3.5 inches) in width, including Smartphones and GPS Devices (iPhone 5C 5 4 3GS 3, iPod, Samsung Galaxy S4 S3, Blackberry, LG, Moto X, HTC One, Sony Ericsson, Nokia Lumia, Google, Nexus, Palm, Garmin, Magellan, Tomtom, and more)
  • Features: Lightweight and portable, easy to attach and detach, with suction cup base (no tools required). 360 degree rotating function allows for optimal viewing angle.
  • Functionality: Securely holds GPS devices, Cellular Phones, Satellite Radios, and PDA's to any vehicle's dashboard.
  • Technology: High power suction cups. One of the sturdiest mounts out in the market guaranteed.

This All Products give to us some advantages, like this :
1. Awesome so glad I got this one
This mount is awesome quality, it replaced a mount I got for $30 and this one is better quality. From the moment you get the box in your hands it feels amazing. The box is makes it feel like a very expensive product you are about to open. And when you open it it doesn't disappoint, the product moves nicely and holds your phone very steady. I would recommend this to anyone.

Pro:
Sturdy
good quality

Con:
Short Arm

Update: 7/27/12 I no longer use this as the item started to slip over time.

2. Car Mount
Holds Galaxy S2 ATT version secure, no wobbles. Wish it was tad taller, but still works great. Use it in 3500 4WD Diesel, plenty of bouncing going on. Holds it strong and secure, bought one for the wife's car as well. Would rebuy again

Edit of 6/11/2012.
The suction cup hold great, but the actual part that holds the phone will not stay secure. You can unloosen the nut and re-adjust. Will hold for 10 second then droop back down. Phone flops around and points at the floor, defeats purpose of mount. When the suction mount is fully deployed, it comes apart it seems at base.

Need more appointment... ?
The Best One I've Used
After spending a ton of money for a good stand I've finally found a good one. I can't say how much I like this product, my phone is secure I can rotate from landscape to portrait with out taking my eyes off the road. After about 5 different stands some costing twice as much I can finally say this is a keeper.
More information by clicking here.

i2 Gear® Universal Car Cd Slot Mount for smartphones, Ipod, Iphone, GPS, Samsung Galaxy S3, S4,Note

Cheap i2 Gear® Universal Car Cd Slot Mount for smartphones, Ipod, Iphone, GPS, Samsung Galaxy S3, S4,Note


This Universal CD car mount for your mobile phones, GPS, and cameras is packed with features!

This mount has a full 360 swivel to support vertical and horizontal positioning. The soft padded base cushions your device while the clamp locks your device in place with solid grooves that snap and lock into position. The clamps have a one touch release to remove or remount your device. And finally you have a switch lock to prevent side to side as well as up and down movement.

The mount itself inser...
  • ONE TOUCH RELEASE - The cradle horizontal lock slow-releases with one touch of a button for placement and removal of your device. Within seconds your device is free to move about :).
  • PROTECT YOUR INVESTMENT - The mount has a cushion base and side padding for protection (approx .13 inches). This allows your device to hold firm and not move about and scratch while driving in adverse conditions.
  • TOP QUALITY CONTROLS - The mount is made of durable plastic and has steel clamp controls for locking the wedge into the CD drive as well as side to side and up and down locking.
  • EASY INSTALL. See Cost Brothers website for a FULL VIDEO assembly guide.
  • FULL 360 DEGREE VIEWS - SIDE TO SIDE Pan to vertical or horizontal placement transforms your mount into a viewing station for both the passenger and driver. Views are adjustable with multi-position vertical, horizontal and device locking. The cradle space has an extendable width from 2.25 to 5 inches. Depth from base to the edge of the side mount is approx. 1 1/16 of an inch. This will accommodate most smartphones on the market as well as many of the hybrid phone / tablets that are appearing on the market. Contact us anytime should you have a question on compatibility.

This All Products give to us some advantages, like this :
1. Great product
I really like this it holds my Galaxy Note 2 with extended battery on it. I have had it for 1 week and I hope it holds up. I would rate it 5 stars if it did not bounce so much a little stiffer would be great. I will update the review if it starts to fail.

2. simple EASY and love it in my Dodge Ram
only reason I didn't give it 5 stars was I had to add a like thickness to the cd tabs,,, not sure if OEM cd player slots are wider than after market, but I had to tweek the tabs for a better fit. outside of that its great.

Need more appointment... ?
good idea, but.....
Basically this accessory is a pretty good idea, but the item itself is kind of flimsy and cheaply made! Well, at this price you probably get what you pay for! It also covers up the clock display on my radio/CD player.
More information by clicking here.

Wednesday, August 28, 2013

In-Vehicle Charging Dock for S Galaxy S III

Cheap In-Vehicle Charging Dock for S Galaxy S III


iBolt In-Vehicle Charging Dock for Samsung Galaxy S3, With the iBolt Charging Dock keep your phone charged and in an easy to view position. Features rubberized and flexible material type boom microUSB. Will not fall down when removed. Automatically starts the Car Mode. Optimal Landscape viewing position. Has removable insert which allows compatibility with most protective cases. With easy access to volume control buttons, can be attached to windshield or dashboard with zero install - attach and ...
  • Keeps your phone charged and in an easy to view position
  • Works with most cases - including Otterbox Commuter
  • 9ft "Charger & Aux-out" cable for easy car stereo integration
  • Automatically starts the car mode in Galaxy S3 and S2
  • Home screen turns horizontal when inserted into Dock

This All Products give to us some advantages, like this :
1. Longevity issues
At first I was quite satisfied with the product. The S3 has an absolutely horrible interface that pops up when the "car dock" mode starts, but that is no fault of the iBolt.

However, after several weeks I started noticing during long trips that my phone was draining battery and not charging as it should have been. When I started paying closer attention I noticed that the connection from the dock to the phone via the USB cable would intermittently terminate. If I bypassed the built-in cable and plugged an external cable into the phone while it's in the dock, I do not see this problem. I only see the problem when the phone is connected directly to the dock.

And then finally, the phone would no longer recognize the connection to the dock at all. This has been a rapid degrading in functionality of the iBolt dock. I still use it as a physical holder of the phone, but for the price charged for this item, I need more value.

(Edited 12/3/2012: I'm happy to say...

2. Works very well if you have the right case and software
Works with those cases:
Works well with my Seidio Active case (ASIN: B008FYFVNE)
Works well with Case-Mate POP! 2 (ASIN: B007ZL0QVA)
Reportedly works with Otterbox commuter (ASIN: B0085JRQQE)

Does NOT work with those case (Use with Ibolt ProDock instead)
Reportedly the Otterbox defender is too big
My wife's Amzer AMZ94215 Double Layer Hybrid Case with Kickstand (ASIN: B008AU20Q4)

A couple of things I learned in setting up this car dock:
- the "car mode" on the phone is just that "a mode".
- We generally associate "car mode" with a special car user interface.
This is really just a car dashboard app that gets started when you enter car mode.
The one that comes with the S3 is miserable (it just starts S-voice asking you what you want to do)

But the Android Play / Market easily comes to the rescue. Just search for "car home" and you will
be presented with a few good options. I use one...

Need more appointment... ?
Fantastic dock for the Samsung Galaxy S3
What can I say? This is a great car dock. Very sturdy, fits the phone nicely with or without case, and plugging in the phone activates 'car mode' (do yourself a favor and get the Car Dock Ultra app to replace S-Voice).

Coming from a former Droid X user who was used to having a phone-specific plug-and-play dock that 'just worked', I had high expectations for car docks. I wanted one that would do the same thing for my GS3 that the old Motorola dock did for the Droid X. This dock does it.

One cool thing to note / minor complaint: the dock leaves the camera exposed so you it can theoretically work as a dash cam. However when the USB cable is plugged in, the picture will be upside-down. This is not iBolt's fault. Apparently when the phone is in car mode it 'locks' the horizontal orientation for reasons known only to Samsung. And the iBolt is holding the phone the 'wrong way'. Of course, if the cradle held the phone the 'right way' the volume controls would be...
More information by clicking here.

RAM Mount Universal X-Grip Holder Twist Lock Suction Cup Mount

Cheapest RAM Mount Universal X-Grip Holder Twist Lock Suction Cup Mount


RAM Mount Universal X-Grip Holder Twist Lock Suction Cup MountPart #: RAM-B-166-UN7The RAM-B-166-UN7 consists of a double socket arm 3.25" twist lock suction cup base and universal spring loaded X-Grip™ holder for cell phones. The suction cup twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket ...
  • Ram Mount Universal X-Grip Holder Twist Lock Suction Cup

This Car Mounts give to us some advantages, like this :
1. The best suction cup mount for your smartphone
Ever since California passed a law outlawing holding your cellular phone while driving, I've been searching for a flexible mounting solution that will allow me to dial and talk without holding my phone. I've tried all manner of mounts and found this one to be the best.

This product consists of four components made by Ram Mounts. Ram Mounts is well-known in the motorcycle and off-road universe for making a wide variety of very high quality mounting solutions for phones and GPS units. The components in this kit are: (1) the X-Grip, which actually holds your phone, (2) a 4-inch long metal arm, (3) a suction cup mount, and (4) a ball joint that connects #2 and #3 together.

The X-Grip is a spring loaded mechanism. You just spread the arms apart and insert your phone. When you release the arms, the arms come together and the four rubber points (they look like circles in the picture) hold your phone in place. The grip is firm, but not so firm that it would damage...

2. Stays On!!
I've tried many different brands and types of mounts. They all failed to stay put and some had cradles that were cumbersome and/or weren't flexible enough to adjust to your car. In fact I gave up for a while, and simply put my phone in the cup holder (those mount types also didnt work well for me). But then I saw the RAM mounts on-line and was impressed with their product line, so I gave it a shot. What a difference! As soon as you unpack it you can feel its weight and see how well made the movable parts are. None of the other mounts I purchased compare in quality. The suction cup is amazingly strong and doesn't fall off. The overall adjustability is great and the phone cradle is easy to work with. I have it mounted just below my rear view mirror in landscape mode and it's been just perfect. If you're looking for a secure, fully adjustable window mount don't waste your money - pony up the extra bucks for this mount. You'll be very glad and in the long run possibly save money by not...

Need more appointment... ?
perfect for iphone 5
This is a great mount for the iPhone and any device that you want to mount on a windscreen. It is fully adjustable to fit a phone or gps unit. I keep it in my travel luggage and use it when I rent a car so that I can always have GPS in a different city.
More information by clicking here.

Tuesday, August 27, 2013

eHotCafe eC1-Rd Universal 2-in-1 Windshield Dashboard GEL Suction Car Mount Holder for Cell Phones - Retail Packaging - Red

Cheap eHotCafe eC1-Rd Universal 2-in-1 Windshield Dashboard GEL Suction Car Mount Holder for Cell Phones - Retail Packaging - Red


Product Overview If you are in the market for an in car dashboard / windshield mount holder for your mobile phone / GPS, you have found the right product. eHotCafe's eC1 is based on innovative and patented "Gel Suction" that works on most uneven surfaces than a traditional suction mount, which only works for Glass surfaces. eC1 features 360 degree swivel for rotating the holder so you can view your phone or GPS in landscape or portrait mode. 2-In-1 Design eC1 works for both Windshield and Dashb...
  • 2-in-1 design offers both Windshield & Dashboard mounting options.
  • Leverages patented and innovative "GEL" Suction pad which works for most uneven surfaces
  • eC1 is compatible with most smart phones and GPS units. Please make sure that width of device is between 3.5" and 5.3"
  • Wipe gel suction bottom gently with wet cloth and dry completely for reuse
  • eC1 is very easy to mount and adjust. eC1 features 360 degree swivel so you can view your phone or GPS in landscape or portrait mode. eC1 lets you tilt up or down about 60 degrees

This All Products give to us some advantages, like this :
1. Excellent Product!
This is an amazing product. No questions about it. Installs in 5 seconds, holds firm even on a non-smooth dashboard. As for holding the actual smartphone, I have an Samsung S4 with an extremely heavy duty aluminum case on it. The phone probably weights double if not more its original weight with the case on and the claw grip on this product holds it in place without a problem. Once the clip is tightened it is still easy to rotate the phone for different viewing angles. While driving on even bumpy dirt roads the stand stays solid and hold the phone without a problem.

2. As expected, no complaints
This product will suction to the dash of my Honda Civic with out any problem. I can get some great angles on it that other mounts simply cannot do. Would highly recommend this!

Need more appointment... ?
Strong hold on dashboard
This is my third or fourth attempt at finding a good car mount for my phone. This works fantastic! Even in the heat it didn't fall off the dashboard. The textured dashboard! It held firm. The grip on the phone takes two hands to get the phone in it. But it doesn't ever fall out which is all I really care about. I highly recommend this!!
More information by clicking here.

Kensington Quick-Release Car Mount for iPhone 5/4S/4/3G, Black, K39256US

Buy Kensington Quick-Release Car Mount for iPhone 5/4S/4/3G, Black, K39256US


A secure seat in seconds for your iPhone or iPod touch. Give your iPhone or iPod touch a secure place to ride even when in a case. The Kensington Quick Release Car Mount´s flexible arms provide a reliable hold on your iPhone or iPod touch on even the roughest terrain. Includes both windshield and vent mounts-use whichever works best for your vehicle.
  • Mount securely holds your iPhone or iPod touch even when in a case (including iPhone 4 and iPhone 5)
  • Flexible arms let you insert and remove your iPhone with one hand
  • Cradle pivots for both landscape and portrait modes
  • Includes both windshield and vent mount-use the one that works best for your vehicle
  • Cable holder keeps charging cable connected (charging cable not included)

This All Products give to us some advantages, like this :
1. Not built for the iPhone 4-
very simply, this mount has rounded clips made specifically for the earlier iPhone models, not for the square edges of the 4.

if you don't believe me just check out the video for this product and you'll see, it's not the iPhone 4 in the demonstration.

that said does this mount work with the iPhone 4? yes, but not without complications. if you put your 4 in this mount without a case, it will eventually slide out through the bottom with each bump you hit in the road. if you have a hard plastic outer case, it will do the same, just a little more slowly. a soft plastic outer case will not slide, but will be pushed around a little every time you take it in and out of the mount.

i've been using this mount with my iPhone 4 for several months now, with an Incipio Silicrylic case (the best iphone 4 case available) and my homegrown solution was to apply electrical tape along the interior sides of the hard plastic clips to provide adequate friction between...

2. Kensington K39256US car mount is great
Just received the mount and its higher quality than what I expected. Definitely not your cheap dealxtreme/meritline build. Iphone 4 fits secure into the friction mount and rotates from portrait to landscape with secure clicks. Mount can be oriented any direction by ball and socket joint which can be loosened/tightened by the turning the wheel.

I prefer the vent mount as a windshield mount will leave behind a telltale circle when taken off inviting break ins. Vent mount is nicely thought out with spring mounted vent hooks so you don't sit there trying to force the thing when taking it off the vent risking damage to the vent/hooks.

Windshield arm is about 10" long and made of rigid plastic material which can be shaped to any angle. I tested it by mounting on a sliding glass door and suction is rock solid and I could not budge it without trying to tear it off by force. One possible issue is there maybe some play on bumpy roads since the arm is quite long. I got...

Need more appointment... ?
Quality vent mount, though clip is stiff
I bought this to be used as a vent mount for my iPhone 4. This device is made of good quality plastic and the vent mount works very well. The vent clips have springs in them so they lock in pretty well. The iPhone 4 fits easily (it's just a clip, I think it can fit many similar sized devices). Once in, you can rotate the iPhone 4 horizontally or vertically.
However, I found that the iPhone clips are pretty stiff. In the video, it seems effortless to clip in the iPhone with one hand. But when I try to push the phone in, I need to use a lot of force, and usually I'm afraid I'll break the vents or the mount. So generally, I use two hands, one hand to pull one of the clips back, and then the other to put the phone in and out. Because of this, I think I would've preferred a "cradle-like" design, so I could just easily/quickly drop in the phone and take it out. When I'm driving, it's dangerous to need two hands to put my phone on the mount or take it off for whatever reason.
More information by clicking here.

iOttie One-Touch Bike Mount Holder for iPhone 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 Nokia Lumia 920 HTC OneX EVO 4G Rhyme DROID RAZR MAXX Google Nexus LG Optimus G BlackBerry Z10 Torch Compact Size GPS

Buy iOttie One-Touch Bike Mount Holder for iPhone 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 Nokia Lumia 920 HTC OneX EVO 4G Rhyme DROID RAZR MAXX Google Nexus LG Optimus G BlackBerry Z10 Torch Compact Size GPS


iOttie One-Touch bike mount is designed with functionality as the main focus. It is easy to use with one touch operation system. With just one finger motion, the device can be mounted and removed with ease. Rather your phone has a skin or a case on, big or small; with a band strap design for additional security, it will hold your phone in place. It has a 360 degree fully adjustable plate for a quick portrait and landscape view, and holds up to 3 inch wide mobile devices. iOttie One-Touch windshi...
  • Easy one-touch mounting system. Lock and release the device with just a push of a finger.
  • Holds up to 3 inch wide mobile devices. Band strap included for additional security
  • Fits motorcycle and bicycle handle bars: 1 1/4" and smaller
  • Fully adjustable with 360 degree rotation for quick portrait and landscape view
  • Made in Korea. US Patent Pending

This All Products give to us some advantages, like this :
1. Don't trust it
iOttie, I mean you guys no harm as this is definitely a decently built product and I appreciate your excellence in response to customer complaints. Just to let you and other readers know beforehand, I'm not the crazy exception to the crowd who just wants to complain to be heard. I (like most of you) spent a ridiculous amount of time trying to find the best phone holder for my bike. After the positive reviews, I went with this iOttie to hold my brand new iphone 4s. After hitting one bump at ~10-15 mph, my phone flew out. In iOttie's defense, i did NOT have the (nicely) attached rubber band around my phone for this fall, so I suppose you could say this is my fault (even though realistically the rubber band shouldnt be doing the protection, it should just be for peace of mind). My phone somehow survived the fall without a scratch (it is in a thin incase case), so i pedaled on sweating my new purchase all the while. My ride was short, not even 10 miles. In those 10 miles, TWICE did the...

2. Reliable, versatile and trustworthy.
A few months ago I was on the hunt for a device like this. I like going out on my bike riding without a destination in mind and often ended up in areas where I couldn't easily find my way back home. I always had my smartphone on me but the GPS is not as useful when kept in your pocket, I needed to watch the screen as I paddled. Back when I started looking for these, there was only one model available, very bulky, expensive and it got low reviews from users cause phones were flying after hitting minor bumps on the road. The iOttie is cool and affordable, there is nothing better around the web for the same price! It allows you to mount the phone on vertical or horizontal positions, has a firm grip and as a safety precaution, it includes a rubber band (not visible on the picture) that allows for more security against unauthorized flights. I've used twice around the city, hit bumps and potholes without a problem. However, I am not a mountain-biker and have not taken this product for a...

Need more appointment... ?
Held iPhone in place for 275 mile trail bike ride
I will start by saying that I do not write reviews that often, but I feel like I have to for the iOttie. Based upon some other feedback, we had some concerns about this product actually holding the phone in place. Happy to report that it held my son's iPhone in place on his crosstrail bicycle during a very bumpy, 275 mile, 4-day ride along the Great Allegheny Passage and C&O Canal trails.

He is 15 years old and he installed it with no issues. Highly recommended.
More information by clicking here.

Monday, August 26, 2013

Samsung Galaxy Universal Suction Car Mount Kit for Samsung Galaxy Phones

Deals for Samsung Galaxy Universal Suction Car Mount Kit for Samsung Galaxy Phones


The Samsung Universal Vehicle Navigation Mount lets you take the brilliance of your Samsung smartphone along for the ride! The custom fitted cradle holds the handset securely during long rides. Attach it to a windshield or dashboard and adjust the multi-angle neck for perfect viewing. GPS capabilities are optimized with navigation applications but that’s just the beginning with the endless Android apps available. With your hands safely on the steering wheel, experience the convenience of power...
  • Speakerphone cradle, GPS navigation, information hands-free with Google Voice Search, run your favorite apps on the go
  • The fitted cradle secures your Samsung smartphone handset during bumpy rides.
  • Mount your Samsung smartphone on the Dashboard or Windshield using the Fully Adjustable, Multi-Angle Neck.

This Car Mounts give to us some advantages, like this :
1. Great product


2. vehicle dock
This device eadily mounts and dismounts from vehicle. It even holds my phone in its otterbox case. As an unknown benefit, it csme with a charger. The charge rate is about 1% / 2 min.

Need more appointment... ?
Don't drive without it
Innovative design that is perfect for the Samsung Galaxy S3, but looks like it will fit other phones as well. grips securely, will mount on dash or on windshield (I like it on the glass). Hold securely enough that punching the screen to select stuff won't disturb the mount. Designed so that the power attachement that comes with it (if you feel you need it) hangs down and the volume buttons easily accessible. Previously tried to find a place for the S3 while navigating and putting it into cup holders was just ridiculous! And dangerous because it forced eyes off road.

And when Samsung gets better at the SIRI thing so you can really just talk to it and get something intelligent going, the mount is going to be just where you want it. I had the original Droid which came with a great vehicle mount from Motorola that would fit only it, and this is easily better. The one button release is a great idea.

I use it to drive four miles to work each way over streets I already...
More information by clicking here.

Sunday, August 25, 2013

Arkon Mega Grip Seat Bolt Floor Mount for Smartphone - Bulk Packaging - Black

Buy Arkon Mega Grip Seat Bolt Floor Mount for Smartphone - Bulk Packaging - Black


Arkon's SM488 Mega Grip Seat Bolt Floor Mount for Smartphone attacheds to your vehicles passenger side seat bolt. Nearly all car's have an exposed or easily accessible passenger-side seat bolt. Arkon's SM488 utilizes this location to position your Smartphone in the car within close proximity. The Mega Grip holder with patented side grip technology will grip nearly all phones from 57mm to 86mm wide including those that have a protective skin or hard case. Compatible with iPhone's, HTC, Motorola, ...
  • Attaches to existing bolt on passenger seat
  • Includes Arkon's Mega Grip holder with patented side gripping technology
  • Compatible with most mobile phones, smartphones, superphones, PDAs with or without a skin or case
  • Fully adjustable with 360 degree rotation for quick portrait and landscape view
  • Great for navigation, handsfree calling and music

This Car Mounts give to us some advantages, like this :
1. Fit perfect for Galaxy Note 2 with extended battery and case
I didn't purchased the mount on Amazon but on Walmart which is cheaper (17.5 free shipping to store for pickup). I mounted this in my wrx 2012 and fit perfect for my Galaxy Note 2 even with extended battery and case. The unit is awesome.

2. Wonderful.
I have loved this particular holder since they started making it, very versatile, but the base was a new thing for me (usually did the suction cups), had to get this for my new job and I could not stick things on the wind-shield of the work truck, this allowed me to put the phone where I can see it without losing sight of the road, and still out of the way of everything I need to do, it isn't taking up a drink holder; or an air-vent or obstructing the view in the wind-shield, if you need a universal mount this is it.

Need more appointment... ?
Great iPhone holder in the car
I bought this as the main part of a "stealth" stereo system in my son's old car. All the speakers are pretty much hidden and we still have the original AM Radio installed (and it works). Our entire system runs off an iPhone in this holder. Just bend it out of the way when not in use and throw a towel or shirt over it - you'll never know it's there.

Overall construction seems very good and it comes with both a solid floor mount and seat-bolt mount. It's not "rock solid" of course, being at the end of an 18" goose neck, but it holds the iPhone quite securely and right where we need it for easy access when driving.

A few of the "lock down" points are plastic or depend on small screws, which might be a concern if your constantly changing the position and orientation of your holder. That's the only reason I gave it 4 starts instead of 5 stars.

Overall - highly recommended for a car application (though you might need the longer version for a truck.)
More information by clicking here.

Saturday, August 24, 2013

eHotCafe eC1-Blk Universal 2-in-1 Windshield Dashboard GEL Suction Car Mount Holder for Cell Phones - Retail Packaging - Black

Cheapest eHotCafe eC1-Blk Universal 2-in-1 Windshield Dashboard GEL Suction Car Mount Holder for Cell Phones - Retail Packaging - Black


Product Overview If you are in the market for an in car dashboard / windshield mount holder for your mobile phone / GPS, you have found the right product. eHotCafe's eC1 is based on innovative and patented "Gel Suction" that works on most uneven surfaces than a traditional suction mount, which only works for Glass surfaces. eC1 features 360 degree swivel for rotating the holder so you can view your phone or GPS in landscape or portrait mode. 2-In-1 Design eC1 works for both Windshield and Dashb...
  • 2-in-1 design offers both Windshield & Dashboard mounting options.
  • Leverages patented and innovative "GEL" Suction pad which works for most uneven surfaces
  • eC1 is compatible with most smart phones and GPS units. Please make sure that width of device is between 3.5" and 5.3"
  • Wipe gel suction bottom gently with wet cloth and dry completely for reuse
  • eC1 is very easy to mount and adjust. eC1 features 360 degree swivel so you can view your phone or GPS in landscape or portrait mode. eC1 lets you tilt up or down about 60 degrees

This Car Mounts give to us some advantages, like this :
1. Excellent Product!
This is an amazing product. No questions about it. Installs in 5 seconds, holds firm even on a non-smooth dashboard. As for holding the actual smartphone, I have an Samsung S4 with an extremely heavy duty aluminum case on it. The phone probably weights double if not more its original weight with the case on and the claw grip on this product holds it in place without a problem. Once the clip is tightened it is still easy to rotate the phone for different viewing angles. While driving on even bumpy dirt roads the stand stays solid and hold the phone without a problem.

2. As expected, no complaints
This product will suction to the dash of my Honda Civic with out any problem. I can get some great angles on it that other mounts simply cannot do. Would highly recommend this!

Need more appointment... ?
Strong hold on dashboard
This is my third or fourth attempt at finding a good car mount for my phone. This works fantastic! Even in the heat it didn't fall off the dashboard. The textured dashboard! It held firm. The grip on the phone takes two hands to get the phone in it. But it doesn't ever fall out which is all I really care about. I highly recommend this!!
More information by clicking here.

Satechi Universal Smartphone CD Slot Mount for 3.5" - 5.5" Smartphones for iPhone 5, 4S, 4, 3GS, 3G, Samsung Galaxy S4, S3, S2, Note, Note 2, Nexus S, HTC One X, S, Motorola Droid Razr HD, Maxx, Nokia Lumia 920, LG Optimus G

Bargain Satechi Universal Smartphone CD Slot Mount for 3.5" - 5.5" Smartphones for iPhone 5, 4S, 4, 3GS, 3G, Samsung Galaxy S4, S3, S2, Note, Note 2, Nexus S, HTC One X, S, Motorola Droid Razr HD, Maxx, Nokia Lumia 920, LG Optimus G


The Satechi Universal Smartphone CD Slot Mount for 3.5"-5.5" Smartphones conveniently mounts your smartphone front and center along your dashboard where it can be easily viewed and reached.Easy to InstallNo tools are required to use this mount since it fits into the CD slot of your car while still allowing you to play CDs. The mount securely keeps your smartphone where you need it most without obstructing your view.Adjustable Height and Screen OrientationAn adjustable arm can be tilted up or dow...
  • Fits 3.5"-5.5" smartphones
  • Fits CD slots 4mm-6mm
  • Requires 20mm space above and 40mm below CD slot to install
  • Adjustable up and down, and 360-degree rotation and tilt
  • Allows CD play

This Car Mounts give to us some advantages, like this :
1. Looks like a good quality CD slot mount, time will tell...
The Satechi Universal Smartphone CD Slot Mount sold by Satechi arrived very quickly. The mount is made out of quality plastic, no assembly is required. It took me 5 seconds to install it. I did rotate the mount slot 180 degrees to have an access to my radio buttons/presets. I still do listen to the news over the radio while driving. I don't use the CD player at all.
I really like it how the wing locks into the CD slot with a single locking lever flip. I didn't have to use any of the additional three sub pads supplied; it sits inside tightly right out of the box. I posted some pics. Sorry they aren't crisp; I made the pics inside of a garage after I received the mount. I will update my review after few months of usage.
The bracket seems to be good quality; however, it is too narrow (9 mm) for my Nexus 4 in Acase Superleggera Pro Hybrid dual layer Case. I hope it will hold the cell while driving through bumps, only time will tell. I tested it holding the bracket in hand and...

2. Worked in our Civic, Toyota & Malibu...easy to use
The Satechi Universal Smartphone CD Slot Mount worked in all of our vehicles. In each case I needed to use one of the three included Sub Pads to ensure a tight fit in the CD holder. Fits CD slots 4mm-6mm

To ensure a secure fit, 3 different sizes of sub pads are included. (1.5mm, 2.0mm & 2.5mm) To test the fit in each vehicle, I wiggled the phone holder. If I could pull it out of the CD slot, I tried a different size sub pad and used the one the held the phone holder tightly & securely in the CD slot. CDs can be played while using this holder; however the phone holder will need to be removed to insert or remove CDs from the CD player.

I first tried installing this smartphone holder in our Malibu. I was getting frustrated because I could easily pull the mount out. After trying each of the Sub Pads, I was still able to pull the phone holder out of the CD slot. That's when I realized that the large Volume control knob, which is under the CD slot, was in the way;...

Need more appointment... ?
Nice dash-mounted option for smartphone access without tools or adhesives...

More information by clicking here.

Thursday, August 22, 2013

Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder

Buy Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder


Ram Mount Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder RAP-B-166-2-UN7U Holders & Clips
  • Lifetime Warranty
  • Color Black
  • Sleek and rugged construction for heavy duty operation
  • Made In The USA
  • High Strength Composite

This Car Mounts give to us some advantages, like this :
1. Good suction cup, good X-Grip, Meh Arm
I have bought several products from RAM, all of them good to great. This one is on the low-end of RAM mounts.

Suction Cup: the design of the suction cup is by far the best I've seen on the market. It's way more solid than the tom-tom and hasn't ever fallen off my windshield.

X-Grip: This is a fairly creative solution to hold a wide array of devices securely. It's not as good as a custom grip, but it works. You need to be careful in where you place the rubber fingers. It's easy to mount on top of a button. I have a series of 15 images of my windshield and the suction cup on my phone from when I mounted my phone and the grip continuously held down the camera button. If I reposition the phone, I might be holding down the volume button. I also have to watch out for the power connector. Pick your poison.

Arm: This part was a little disappointing. I was expecting the higher quality aluminum arm that came with my other RAM mounts. The arm design is...

2. Best Car Mount I Have Ever Used
I purchased this item after purchasing multiple other cell phone car mounts in the 20-30 dollar range. The positive reviews for this are accurate. The mount is incredibly sturdy. The suction cup is strong and easy to use. The universal X-Grip is solidly built and holds my phone without slipping or having to awkwardly adjust the unit. Based on my experience so far, I expect this to last a long time.

Need more appointment... ?
Great solution for iPhone w/case
I have an iPhone 5 with a Speck SmartFlex wallet case. The grips hold my iPhone securely in place. Suction cup mount sticks to windshield just fine. Great piece of hardware.
More information by clicking here.

USA GEAR Adjustable Car Cup Holder Phone Mount & Charging Station with 3 DC Outlets and Dual USB Ports for Samsung Galaxy S4 / S IV , LG Nexus 4 , Moto X & More Smartphones and MP3 Players

Deals for USA GEAR Adjustable Car Cup Holder Phone Mount & Charging Station with 3 DC Outlets and Dual USB Ports for Samsung Galaxy S4 / S IV , LG Nexus 4 , Moto X & More Smartphones and MP3 Players


USA Gear Power Cup Holder MountVersatileThis is the perfect vehicle mounting solution for smartphones and mp3 players! The adjustable wings & boots fit to your device, while flexible neck & swivel joint allow 360 degree rotation and tilt. Finding the perfect viewing angle has never been easier! Twist the cup holder base to expand and fit virtually any vehicle for your convenience!Power Up!Not three or four, but FIVE power ports allow everyone to charge their devices at once! The mount base inclu...
  • Fully articulating swivel joint and flexible next allow ideal positioning and angle in upright or landscape modes; Twist bottom to expand for snug cupholder fit!
  • Three DC outlets and two USB ports allow you to charge up to five devices at once
  • Docking cradle features adjustable rubberized wings and boots to safely and securely mount your phone, smartphone, or mp3 player
  • Expanding cup holder base is adjustable to virtually any cup holder in your car , truck , boat , or other vehicle
  • Quality guarantee - backed by the USA Gear 3-Year Manufacturer's Warranty!

This Car Mounts give to us some advantages, like this :
1. Great idea for phone mount but...
I love the mount, using the console cup holder is a great idea, but no matter how much I tighten the base, there's still a slight wobble. I realize not all cup holders are the same: there are three in my car's console and all are different sizes. It's only a small wobble.

The only other issue I have with the device is power. I love the powered USB ports built in to the base of the holder. I even found a 6-inch USB cable that's perfect. I do wish the device would charge at the AC charging rates (~1A) rather than the USB rate (~500mA). I typically use my phone for navigation and to stream music while driving. Doing both while charging from this device uses more current than the charger supplies, running the phone's battery down on long trips.

Otherwise, this is a welcome addition to my car.

2. truckdriver
Love this product it is a great buy and very functional tool for driving! It works and fits great in a cupholder

Need more appointment... ?
Convient in Mazda CX-5 with Galaxy Note 2
I use this in my 2013 Mazda CX-5 for displaying and charging my "LARGE and IN-CHARGE" Samsung Galaxy Note 2.
The set-up in my Mazda CX-5 is perfect for this type of mount. The cup holder is in the center console and very easily reachable while driving.
Make sure that you check your vehicle settings before buying this though, my old VW Jetta 2002 had a WIRE-FRAME FLIP-OUT CUP HOLDER and this thing definetely wouldn' work in it. USB cHarging is as good as my Galaxy Note's AC charger. The head is adjustable to be in landscape or vertical.
This thing also let's you plug in a passenger's phone to charge. All around great product.
More information by clicking here.

Wednesday, August 21, 2013

Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smart Phones, Apple iPhone 5 / 5S / 5C / 4 / 4S / 3G, Samsung Galaxy S2 / S3 / S4, Galaxy NOTE 2, Motorola Droid RAZR / MAXX, HTC EVO 4G, HTC One X, LG Revolution, GPS Holder (Black)

Cheap Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smart Phones, Apple iPhone 5 / 5S / 5C / 4 / 4S / 3G, Samsung Galaxy S2 / S3 / S4, Galaxy NOTE 2, Motorola Droid RAZR / MAXX, HTC EVO 4G, HTC One X, LG Revolution, GPS Holder (Black)



  • Universal Car Mount for most Phones. Quickly and easily mount and unmount your phone or device.
  • Fits most Phones with 3.5 to 5.5 inch screens (Including the latest Galaxy Note 2). Adjustable 360° viewing angles.
  • Single-handed operation. No more hassle putting your phone or device on the mount.
  • Package includes: 1 Car Mount, 1 3M Tape* (used for breathable surface material), Instructions.
  • See if U-Grip below..

This All Products give to us some advantages, like this :
1. I didn't know she had the GI Joe Kung-Fu grip.
You've no doubt noticed that most of the companies that make cell phone peripherals just crap poorly-designed junk out of the lowest-bidder Chinese factory, or even worse, rebrand somebody else's steaming turd as their own. I've gone through a half-dozen mounts from both no-name to brand-name and ended up returning them all.

My BMW probably doesn't help. It's got a dashboard with a pebbled/textured finish. It's not perfectly flat. And I drive like a jerk. The latter is a crucial point of failure for mounts with a longer reach that multiply the leverage of a heavy phone on a suction cup. Read: mount (with phone attached) goes flying off to the side, usually into my passenger's face.

I figured this one had physics working in its favor off the bat, being so short (but I was a tad worried about it having the phone out of reach). Turns out that's not a problem. Neither is the AMAZING grip on the dashboard side. As others mentioned, it's a suction cup AND an (reusable)...

2. The only one of 4 models I've tried that works!
I ended up purchasing four different car phone holders before I found one that works - that sticks to my dashboard, holds my IPhone 4, makes it relatively easy, with one hand, to insert the phone and remove it. And it stays stuck to the dashboard. I drive a late model Subaru Outback and after placing and testing the mount in many different locations, I found the most convenient one for me was mounted to the dash on left side of the steering wheel.

The three models that would not stick to the dashboard, anywhere I tried, are as follows (I returned them to Amazon without a problem:)
The iOttie Windshield Dashboard Car Mount Holder
The iOttie Easy Flex2 Windshield Dashboard Car Mount Holder & Desk Stand
The Tylt Capio Universal Car Mount

The one model that works, and is still working after a month, is the Aduro U-GRIP Universal Dashboard Windshield Car Mount. An added note is that this model comes with an extra grip in case the mount doesn't...

Need more appointment... ?
Great with Galaxy Note & iPhone
I just started using this one about 3 days ago. Overall, I'm very satisfied with this item. You can operate it with one hand for iPhone, but it requires you to use two hands to open it for the larger Galaxy Note. I attached it on Nissan Altima's textured dashboard, and it hangs on perfectly. Two things I noted were.. if you want to remove it from your dashboard, it's not quite easy since the suction cup is a bit sticky. And when you drive with your phone on this item, it wobbles a little tiny bit, but not much and it does not bother me at all. I'm thinking about buying another one for my wife.

Pros:
- Easy to install
- Very strong suction
- Holds large phones (Galaxy Note - 3.27" width)

Cons:
- Wobbles a tiny bit, but negligible

* I also noticed that the bottom part of my older car mount(from Arcon) fits perfectly well into this item. I'm not sure if they all follow a universal standard.. but it can be used as the replacement if...
More information by clicking here.

RAM Mount Universal X-Grip Cell Phone Holder with 1-Inch Ball

Cheapest RAM Mount Universal X-Grip Cell Phone Holder with 1-Inch Ball


RAM Universal X-Grip Cell Phone Holder w/1" BallPart #: RAM-HOL-UN7BUSometimes its all about the design. If you are looking for a pact mount for your cell phone without that cookie cutter shape you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect pliment to the modern sleek interior of today's vehicles the RAM X-Grip™ is the cell phone holder evolved. Compatible and intercha...
  • Ram Mount Universal X-Grip Cell Phone Holder W/ 1" Ball

This Marine Electronics give to us some advantages, like this :
1. It works! Great holder for any smartphone.


2. No complaints.
Just installed it today on my motorcycle and was very impressed. I have a Motorola Razr Maxx, which is one of the larger phones on the market(even larger with the waterproof case I have on it). Fits very well and never seemed to slip ever when installed outside of the windshield going 70+mph(did it for testing purposes). Very easy to place and remove the phone even with large gloves on. Even looks cool in my opinion.

Need more appointment... ?
Critical Design Flaw

More information by clicking here.

Tuesday, August 20, 2013

Koomus Dashboard Windshield Universal Smartphone iPhone Car Mount Holder Cradle for iPhone 5 5S 5C 4S 4 3GS iPod Touch Samsung Galaxy S3 S4 Note 2 Google Droid GPS Smartphone car mount in Black

Bargain Koomus Dashboard Windshield Universal Smartphone iPhone Car Mount Holder Cradle for iPhone 5 5S 5C 4S 4 3GS iPod Touch Samsung Galaxy S3 S4 Note 2 Google Droid GPS Smartphone car mount in Black


Koomus K2 Dashboard and Windshield Mount holder is slim and solid innovative product for use with all versions of the iPhone and other android smartphones. Innovative 3M Gel Pad attached to mount itself will give extra strong suction to any vehicle's dashboard and windshield. Therefore, you do not need to attach sticky flat pad to your dashboard in order to attach mount on top of it. Easy one touch lever method will provide extra convenient mounting experience since you only need to push down t...
  • Stretchable holder can hold upto 3.27inch wide
  • Full 360 degree rotatable, can be mounted with any thick or thin protective cases on it
  • 3M Gel pad can be cleaned in water and easily reattachable after several use; No sticky pad is needed!
  • Easy mount using One Touch Lever
  • Compatible with all iPhone, Samsung Galaxy and all other smartphones

This Car Mounts give to us some advantages, like this :
1. Koomus IPhone Dash Mount - Black
Im not so sure how some other reviewers did not like this product! I did exactly what the instructions said (clean the dash, remove the gel's plastic covering, put it on the dash, and turn the knob) and it works great! I just got back from a conference and it was a 3 1/2 hour ride both ways (that is actually the reason I bought this dash mount). My iPhone did not budge once and the mount stuck like glue to my dash!!! This thing is great and I would highly recommend this!!! It is so very easy to use, it's adjustable, and it doesn't budge! Give it a try and you'll be very satisfied, I know I am!

2. I had this for 5 months. The internal spring broke!
This is a great device. I really, really like it. It is easy to use and stays solidly on my dashboard - even though it has a roughly pebbled finish. I think that this is the best device of its kind.

After about 5 months of use, the internal spring broke! I was so bummed! I wrote to Koomus and they replaced it at no charge. Unbelievable! A great product from a great company that backs up its products. I am sold!

Need more appointment... ?
Finally one that adheres!
I've tried a couple of different windshield mounts and none of them adhered for a long period of time without falling. This one uses a pad that really sticks and doesn't leave any residue when removed; it fits my Galaxy Note II perfectly. It's a great value for an item that works.
More information by clicking here.

Monday, August 19, 2013

InfiniApps Slyde CD Slot Mount for Smartphones, Cradle-less Universal cell phone holder with Quick-snap technology, magnetic cell phone mount

Bargain InfiniApps Slyde CD Slot Mount for Smartphones, Cradle-less Universal cell phone holder with Quick-snap technology, magnetic cell phone mount


The InfiniApps' Slyde CD Mount for Smartphones is an innovative approach to mounting. Simple and seamless with our patent pending system, just hover your smartphone near the magnetic mounting face and instantly set it securely in place. Snap on, snap off. Amazingly fast one-handed operation makes any mounting and dismounting action effortless and quick. Slyde CD mount is also Cradle-less with no view obstructing brackets that requires both set of hands to mount on/off.
Our high friction ma...
  • Now Only Shipping Slyde CD mount version 2.0 with improved stability controlled Goose neck. This product is Designed and Assembled in USA.
  • Inserts into front loading CD player slot, where device controls are easily accessible by the driver. The Slyde CD slot mount is designed to fit firmly in your car's CD slot while allowing the CD player to function normally.
  • Patent pending magnetic mounting system provides virtually an auto-mounting of your phone. You can literally toss your phone towards the mount, and the magnetic base will pull it securely in place. Simplest one-hand operation, even with your eyes closed. No more struggling to mount your phone ON/OFF. Fully adjustable, tilt and rotate, for the best viewing angles. Please check out the video demo at https://infini-apps-com.myshopify.com/pages/slyde-cd-mount
  • UltraThin High Carbon Steel Insert Plate will secure your phone steadily and safely while mounted on the Slyde CD Mount.
  • Package includes 1 x Slyde CD Mount + 2 x Metal Insert Plate (one with tape for securing application and one without tape for maximum "thinness" or tight fitting application).

This Car Mounts give to us some advantages, like this :
1. awesome stand!


2. Update: NEW version is great!
Final update:

The seller's customer service is outstanding! Not only did they respond immediately, they kept me updated, sent me the new version quickly, and emailed again to make sure I received it.

There is very little jiggling with the new version, no more than I had with my GPS suction-mounted on my dashboard, when it actually stuck to the dashboard (couldn't put it on the windshield). I finally chucked that thing out the window one day because I was so tired of it falling off after 30 minutes. (It was a symbolic gesture: I was in my driveway and it landed on the grass.)

I started using my smartphone as a GPS, but I didn't feel safe picking it up to look at it, so I relied on the audio. And when I played music from my phone through my car stereo, I had to wait until I was at a stop light to fish around for it and pick it up so I could skip songs.

I'd been wanting a universal smartphone car mount, but I knew that if it was too much of a...

Need more appointment... ?
Like others have said - just buy it.
I use this phone holder for my Note II. My Note is big, somewhat heavy in its case, and I was worried this would not hold it. I don't drive on rocky terrain, but I do hit my share of potholes and this thing has never failed me in the 6 weeks or so that I've had it. My wife tried it out for her Samsung S4 and I had to buy her one or risk losing mine. There may be better ones out there, but I haven't found one. It's secure, easy to slip your phone on to it and remove it, it maintains your access to you connections such as a output plug and a charger, in short, it does all you could ask for. I'd get another if I ever lose this one, and that's about as good as endorsement as I could give.
More information by clicking here.

Sunday, August 18, 2013

Koomus Dashboard Windshield Universal Smartphone iPhone Car Mount Holder Cradle for iPhone 5 5S 5C 4S 4 3GS iPod Touch Samsung Galaxy S3 S4 Note 2 Google Droid GPS Smartphone car mount in White

Cheapest Koomus Dashboard Windshield Universal Smartphone iPhone Car Mount Holder Cradle for iPhone 5 5S 5C 4S 4 3GS iPod Touch Samsung Galaxy S3 S4 Note 2 Google Droid GPS Smartphone car mount in White


Koomus K2 Dashboard and Windshield Mount holder is slim and solid innovative product for use with all versions of the iPhone and other android smartphones. Innovative 3M Gel Pad attached to mount itself will give extra strong suction to any vehicle's dashboard and windshield. Therefore, you do not need to attach sticky flat pad to your dashboard in order to attach mount on top of it. Easy one touch lever method will provide extra convenient mounting experience since you only need to push down t...
  • Stretchable holder can hold upto 3.27inch wide
  • Full 360 degree rotatable, can be mounted with any thick or thin protective cases on it
  • 3M Gel pad can be cleaned in water and easily reattachable after several use; No sticky pad is needed!
  • Easy mount using One Touch Lever
  • Compatible with all iPhone, Samsung Galaxy and all other smartphones

This Car Mounts give to us some advantages, like this :
1. Very Sticky
I bought this product for my new iphone 4s, it is very sticky on my corolla's dashboard. Love it, give it five stars rating! Strongly recommended

2. Love its color
I recently purchased one of black iphone mount from local at&t store but I didn't quite like it because my iphone 4 is white and I wanted to match the mount's color with my iphone. Luckly, I found this one in amazon, so I bought it last week and I'm using this one for my garmin gps app in my nissan altima. One thing I like about this mount is that it doesn't require a sticky pad which you usually have to attach it to the dashboard and honestly, I hated the pad on my car b/c it was ugly.. However, this one was pretty easy for me to install w/o needing of any sticky pad and I just pushed button at the back to secure it and of course, it works perfectly so far.. Anyway, above all pros and cons(haven't found any yet..), I like the color of this product and that was the main reason I bought this product for my car(only white mount I have found in amazon) and I absolutely love it!

Need more appointment... ?
Best iPhone card holder I've seen
I got this for my Elantra and it works great and looks nice.
Sticks to my dash without any problems and does not leave marks.

I would definitely get this for my other cars.

I've had it for a few months now and still works
More information by clicking here.

iOttie Easy View Windshield Dashboard Car Mount Holder Cradle for iPhone 5s 5c 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 Nokia Lumia 920 HTC OneX EVO 4G Rhyme DROID RAZR MAXX Google Nexus LG Optimus G BlackBerry Z10 Torch Compact Size GPS

Bargain iOttie Easy View Windshield Dashboard Car Mount Holder Cradle for iPhone 5s 5c 5 4S 4 3GS iPod Touch Samsung Galaxy S4 S3 S2 Nokia Lumia 920 HTC OneX EVO 4G Rhyme DROID RAZR MAXX Google Nexus LG Optimus G BlackBerry Z10 Torch Compact Size GPS


The iOttie Easy View Car Mount provides optimal viewing for every situation. The sleek mount delivers prime sight angles with just the twist of a knob, and allows your device to be seen from anywhere in your vehicle. Once the super suction pad is placed on your dashboard or windshield, the drop of the lever guarantees it won't budge. Because of its superior views, one touch functions, and solid grip, it's easy to see why the iOttie Easy View Car Mount is your device's top choice! Get protected. ...
  • Mount is easily adjustable with a quick turn of the knob and provides 360⁰ viewing angles
  • Foam grips guards your device as it easily rotates between landscape and portrait views
  • Easy one touch mounting system makes it easier to place the phone into the mount
  • Super strong suction pad mounts solidly to dashboards and windshields and is easily removable
  • Securely holds devices up to 3 inches in width and offers access to all exterior ports

This All Products give to us some advantages, like this :
1. bad release mechanism..
I bought the iOttie EasyView after having a great experience with iOttie Easy One Touch. Did that mainly for the looks. That was a bad decision :( Should have gone for another One Touch.

The EasyVIew is easy to install and view, and looks better than the OneTouch. It sticks, from what I can tell, just as good (or as bad, if you are trying to remove it) the OneTouch: near impossible to remove. If/when you manage to remove it from the dash/windshield, it comes off clean - no residues at all. Putting your phone on the mount is just as easy as OneTouch. Those are all good.

The problem is with removing your phone. Unlike the OneTouch, the EasyView requires you to pull on one of the "arms" on the side. The problem with that is, it exerts severe pressure on the "neck" and the "foot" of the mount. In my case, the foot really held on well, but the "neck" didn't. No matter how tight I set it, after removing the phone a couple of times, the neck turns to whichever side you...

2. Super adaptable
I've been using this with several different rental cars and an iPhone 5. It feels very minimalistic for keeping in my luggage and love that it sticks to the dash.

On my first use, I did have a really hard time getting it off the dashboard and was a little concerned. However, it didn't leave any marks behind and has kept working with other cars. They recommend washing the suction cup with soap and water and I found that helps keep it working well when I switch cars. (The material reminds me off the little sticky bouncy balls that you get out of gum ball machines and stick against walls).

Need more appointment... ?
Amazing grip and svelte aesthetics
Like others, I was very impressed with the grip of this device compared to traditional suction cup mounts. I ordered this just before taking a 14-hour road trip, and not once did this mount show any signs of budging, even with removing and re-inserting my phone several times over the course of the trip.

I was a little concerned over how well it would hold my phone (a Samsung Galaxy S III with an Acase Superleggera Hybrid Case) when I was comparing it to the iOttie One Touch Universal Car Mount on Amazon. The lack of a bottom support in portrait mode, plus the thickness of my phone's case, is what I was most worried about. I am happy to say that my concerns were completely unwarranted and this case holds my phone very securely, both in and out of its case. I...
More information by clicking here.

Saturday, August 17, 2013

Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smart Phones, Apple iPhone 5 / 5S / 5C / 4 / 4S / 3G, Samsung Galaxy S2 / S3 / S4, Galaxy NOTE 2, Motorola Droid RAZR / MAXX, HTC EVO 4G, HTC One X, LG Revolution, GPS Holder (Black/Red)

Bargain Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smart Phones, Apple iPhone 5 / 5S / 5C / 4 / 4S / 3G, Samsung Galaxy S2 / S3 / S4, Galaxy NOTE 2, Motorola Droid RAZR / MAXX, HTC EVO 4G, HTC One X, LG Revolution, GPS Holder (Black/Red)


Universal Dashboard Windshield Car Mount for Smart Phones.
  • Universal Car Mount for most Phones. Quickly and easily mount and unmount your phone or device.
  • Fits most Phones with 3.5 to 5.5 inch screens (Including the latest Galaxy Note 2). Adjustable 360° viewing angles.
  • Single-handed operation. No more hassle putting your phone or device on the mount.
  • Package includes: 1 Car Mount, 1 3M Tape* (used for breathable surface material), Instructions.
  • See if U-Grip below.

This Car Mounts give to us some advantages, like this :
1. I didn't know she had the GI Joe Kung-Fu grip.
You've no doubt noticed that most of the companies that make cell phone peripherals just crap poorly-designed junk out of the lowest-bidder Chinese factory, or even worse, rebrand somebody else's steaming turd as their own. I've gone through a half-dozen mounts from both no-name to brand-name and ended up returning them all.

My BMW probably doesn't help. It's got a dashboard with a pebbled/textured finish. It's not perfectly flat. And I drive like a jerk. The latter is a crucial point of failure for mounts with a longer reach that multiply the leverage of a heavy phone on a suction cup. Read: mount (with phone attached) goes flying off to the side, usually into my passenger's face.

I figured this one had physics working in its favor off the bat, being so short (but I was a tad worried about it having the phone out of reach). Turns out that's not a problem. Neither is the AMAZING grip on the dashboard side. As others mentioned, it's a suction cup AND an (reusable)...

2. The only one of 4 models I've tried that works!
I ended up purchasing four different car phone holders before I found one that works - that sticks to my dashboard, holds my IPhone 4, makes it relatively easy, with one hand, to insert the phone and remove it. And it stays stuck to the dashboard. I drive a late model Subaru Outback and after placing and testing the mount in many different locations, I found the most convenient one for me was mounted to the dash on left side of the steering wheel.

The three models that would not stick to the dashboard, anywhere I tried, are as follows (I returned them to Amazon without a problem:)
The iOttie Windshield Dashboard Car Mount Holder
The iOttie Easy Flex2 Windshield Dashboard Car Mount Holder & Desk Stand
The Tylt Capio Universal Car Mount

The one model that works, and is still working after a month, is the Aduro U-GRIP Universal Dashboard Windshield Car Mount. An added note is that this model comes with an extra grip in case the mount doesn't...

Need more appointment... ?
Great with Galaxy Note & iPhone
I just started using this one about 3 days ago. Overall, I'm very satisfied with this item. You can operate it with one hand for iPhone, but it requires you to use two hands to open it for the larger Galaxy Note. I attached it on Nissan Altima's textured dashboard, and it hangs on perfectly. Two things I noted were.. if you want to remove it from your dashboard, it's not quite easy since the suction cup is a bit sticky. And when you drive with your phone on this item, it wobbles a little tiny bit, but not much and it does not bother me at all. I'm thinking about buying another one for my wife.

Pros:
- Easy to install
- Very strong suction
- Holds large phones (Galaxy Note - 3.27" width)

Cons:
- Wobbles a tiny bit, but negligible

* I also noticed that the bottom part of my older car mount(from Arcon) fits perfectly well into this item. I'm not sure if they all follow a universal standard.. but it can be used as the replacement if...
More information by clicking here.

iOttie One Touch XL Windshield Dashboard Car Mount Holder for Galaxy S4, Galaxy Note 3/2 - Retail Packaging - Black

Deals for iOttie One Touch XL Windshield Dashboard Car Mount Holder for Galaxy S4, Galaxy Note 3/2 - Retail Packaging - Black


iOttie Easy One Touch & One Touch XL Car Mount The iOttie One Touch Windshield Dashboard Car Mount's main focus is functionality. It has an easy one touch feature that allows for mounting and releasing of the device with just the push of a finger. Thanks to its super strong sticky gel pad, the One Touch Car Mount sticks securely to most smooth flat surfaces, as well as most non-curved surfaces, and yet is still easily removable. The ...
  • Easy one-touch mounting system locks and releases the device with just a push of a finger
  • Extra-large strong suction cup attaches to the windshield or most smooth flat surfaces and is easily removable
  • Super strong suction cup can be restored to its mint condition by rinsing it with warm water and allowing it to air dry
  • Fully adjustable with 360 degree rotation for quick portrait and landscape views
  • No slip-grip securely holds mobile devices up to 3.5 inches wide

This All Products give to us some advantages, like this :
1. Perfect...Unless you have a Galaxy S3
I got this because it specifically mentioned compatibility with my new Galaxy S3. I would love to be able to keep it but the side bars are directly over the power and volume toggles so every time I put the phone it it turns my audio all the down. I will be returning it and can't recommend it for anyone who has a Galaxy S3

UPDATE: I received a call from iOttie the same day I placed my original one star review. I discussed my issue with the design and the product being sold for the S3. They not only sent me a new mount which worked with my phone they took the Galaxy S3 off the product description. I can only hope that a company as responsive and capable as this experiences tremendous success. My ne mount works great. It is well constructed, well designed and sticks to my dashboard like it is welded to it.

2. Works well, just tight with the Otterbox
My main concern when purchasing was that it would not work with the OtterBox. I can place the phone in the mount with the OtterBox Defender case on it. You just about have to pry it to get the phone in and out. The quick release doesn't really work since it is so tight in the mount. I really don't have an issue with that just wanted to let others know how it works with the OtterBox case.

Need more appointment... ?
Excellent
Very good quality. Solid construction. Will fit a Galaxy Note with a slim-fit case with no problem. Easy to adjust and move around. Very impressed.
More information by clicking here.

Thursday, August 15, 2013

iMagnet Cradle-less Universal Phone Mount with Quick-snap Technology, One Hand Smartphone Car Windshield Dashboard Mount Holder for iPhone 4S/5, Galaxy S4/S3/S2, Blackberry Bold, Note 2, Android HTC One

Bargain iMagnet Cradle-less Universal Phone Mount with Quick-snap Technology, One Hand Smartphone Car Windshield Dashboard Mount Holder for iPhone 4S/5, Galaxy S4/S3/S2, Blackberry Bold, Note 2, Android HTC One


iMagnet Mount for Smartphones is a Universal Phone Mount that makes phone mounting effortless. Works with a phone of any size and is compatible with most smartphones. The iMagnet Mount suction cup can mount on most textured surfaces such as dashboards for maximum visibility. Simple and seamless, just hover your smartphone near the magnetic surface and instantly set it securely in place. Snap on, snap off... amazingly fast one-handed operation makes any mount and dismount action effortless and qu...
  • A Universal Phone Mount that can mount a phone of any size. Is compatible with Samsung Galaxy S3/S4, Note 2, Blackberry and all iPhones
  • 2X as powerful as traditional suction cups, iMagnet mounts securely on most textured surfaces, including car dashboards, and curved surfaces where other mounts fail to hold; Patented high-resilience sticky gel suction cup is washable and extremely durable, restoring its full stickiness and feels just like new after cleaning with mild soap and water
  • Effortless one-handed operation for close proximity with Quick-snap Technology; Mount and unmount your phone seamlessly and effortlessly
  • Adjustable swivel for maximum accessibility, allowing a 360° rotation and a 90° swivel in any direction; Turn your phone portrait or landscape at anytime!
  • The ultimate driver's necessity: Go magnetic, go cradle-less - never go back to mounting your smartphone using traditional clamps and holders ever again

This Car Mounts give to us some advantages, like this :
1. Simple and works perfectly


2. Great solution to universal docks!
I don't usually write reviews but the imagnet deserves one.

I had been looking for a simple, clutter free, one handed solution for docking my phone in my car. Ive tried universal docks which end up falling apart or losing their grip. Ive tried a specifically made dock but they're too tight to use with a case.

Im not using the suction mount aspect (so i wont be talking about it). I took off the magnet and mounted it directly to my dash.
-Magnet is super strong
-metal disks are extremely thin (was surprised how thin)
-fits between my phone and case

The beauty of it is I get in my car and just slap it on the magnet. No fuss, no adjusting.

Case thickness does affect the strength of hold however. So if you have a bulky case (otterbox), you might consider a different case or just mounting the magnet to the back. Its thin enough to not even notice.

Need more appointment... ?
Great mounting mechanism
Perfect way to mount my iphone on my car dashboard. I've used holders with suction cups before but it would only hold well on glass surfaces. The suction cup on the imagnet has a sticky layer that makes it possible to use on my textured dashboard. It's good how the holder doesn't block my vision now. I like how this holder doesn't have any brackets that block the volume and silent buttons on the side of the phone. The mount provides sufficient support in all directions including upside down.

The magnetic snapping action is really sweet and I don't even have to look at where I'm mounting my phone to anymore. With other mounts I needed two hands, one hand to hold the phone, and the other hand to open the clamps.

However:
- There's no interference issues with my iphone from the magnets, but it does cause temporary loss of direction in the MAPS app.
- The sticky suction cup is really good (different to the normal ones) but it won't work on wood (such as my...
More information by clicking here.

iOttie HLCRIO104 Easy Flex 2 Windshield Dashboard Car/Desk Mount Holder for iPhone 4S/5/5S/5C, Galaxy S4/S3/S2, HTC One, Nokia Lumia 920 - Retail Packaging - Black

Buy iOttie HLCRIO104 Easy Flex 2 Windshield Dashboard Car/Desk Mount Holder for iPhone 4S/5/5S/5C, Galaxy S4/S3/S2, HTC One, Nokia Lumia 920 - Retail Packaging - Black


To Remove the Mount view larger The Easy Flex 2 Car Mount Holder Desk Stand for iPhone 5, 4S, and Smartphones is unlike any smartphone holder. Its small and compact structure makes it the perfect mount for everywhere from your car to your desk. It has an easy one touch feature that allows for mounting of a device with just the push of a finger. Thanks to its super strong sticky gel pad, ...
  • Easy one-touch mounting system locks and releases the device with just the push of a finger
  • Extra-large suction cup guarantees the mount will stay put on most smooth surfaces, yet is still easily removable
  • Between its multi-angle and 360 degree rotations optimal viewing of your device at any angle is possible
  • Foam grips ensure the protection of your mobile device and provide a no-slip hold
  • The small and compact mount fits mobile devices up to 3 inches wide

This All Products give to us some advantages, like this :
1. A great little car mount
PROS:
- The mount is very small in size and compacts nicely when closed so it doesn't take up much space
- You can easily rotate the arm to just about any viewing angle, and turn the phone around from a portrait to landscape view without removing anything
- The pincher is able to hold very large phones, including my Samsung Galaxy S3 (with a case on it)
- The suction cup is very strong: it was able to attach to my dash, which has a textured surface, and not fall off on a long trip

CONS:
- The suction cup is very strong: they provide a small tab on the back for you to pull to remove the suction cup (after you twist the dial), but even still, it can be very difficult to pry it lose if it has a great seal to the surface it's on
- If you have a stiff suspension like in my car, the phone will sometimes jiggle around a bit (although this more a fault of the car than the mount)

2. Simple yet elegant car mount for the iPhone 5
After I upgraded to the iPhone 5, I needed a car mount as my Magellan car mount is no longer compatible due to the lightning port and the phone being taller. This car mount is easy to use, extremely portable, and works with different devices and not just the iPhone 5, which is great so you don't have to buy a new mount whenever you buy a new phone. You can securely mount it on your windshield or dashboard. The sticky pad is really sticky. I mount it on the windshield, and I had to pull it really hard to get it off. But I mount mine on the dashboard since it's closer to eye level, and it's easier to reach than mounting it on a windshield. I have a textured dashboard, and it mounts without any problem. The mount has two arms to secure the phone without any support at the bottom. I prefer a mount without any extra support down at the bottom so you can access all the ports without that getting in the way. This is especially the case if you're using it with the iPhone 5 since the...

Need more appointment... ?
Holds great but affect bluetooth
To start, I got the product in a timely manner (about a week).

I was worried about the clasp part of the product not being strong enough to squeeze my phone. My next worry was the phone slipping out of the grasp of the clasp. I think both of the worries were resolved when I noticed the clasp is quite strong and there are sticky grips on the clasp as well. Despite the bumps, its held onto my phone very tightly. So no problem here. There is a 'one-handed' mount feature which is nice. There is a release button in the middle of the mount face that, when pushed in, releases the clasp and grabs the phone. Nice for getting in the car and putting the phone in without fussing with the clasps.

The swivel is great. Let's you angle and tilt basically any way you need (assuming you mount the iOttie pointing in the general direction you want/need). The swivel is strong too so you won't have to worry about a bump causing a re-angling or re-tilting of the mount.

Now I...
More information by clicking here.

iOttie HLCRIO102 One Touch Windshield Dashboard Universal Car Mount Holder for iPhone 4S/5/5S/5C, Galaxy S4/S3/S2, HTC One DROID RAZR HD - Retail Packaging - Black

Cheap iOttie HLCRIO102 One Touch Windshield Dashboard Universal Car Mount Holder for iPhone 4S/5/5S/5C, Galaxy S4/S3/S2, HTC One DROID RAZR HD - Retail Packaging - Black


iOttie Easy One Touch & One Touch XL Car Mount The iOttie One Touch Windshield Dashboard Car Mount's main focus is functionality. It has an easy one touch feature that allows for mounting and releasing of the device with just the push of a finger. Thanks to its super strong sticky gel pad, the One Touch Car Mount sticks securely to most smooth flat surfaces, as well as most non-curved surfaces, and yet is still easily removable. The ...
  • Easy one-touch mounting system locks and releases the device with just a push of a finger
  • Super strong suction cup can be restored to its mint condition by rinsing it with warm water and allowing it to air dry
  • Fully adjustable with 360 degree rotation for quick portrait and landscape views
  • No slip-grip securely holds mobile devices up to 3 inches wide
  • Extra-large strong suction cup attaches to the windshield or most smooth flat surfaces and is easily removable

This All Products give to us some advantages, like this :
1. Great for iphone WITH cases


2. Suction cup better than super glue.
One handed mounting is very convenient. The mount seems to be made of a good quality plastic with strong knobs and hinges. It holds the iPhone 4s in an Acase(TM) iPhone 4 and 4S Superleggera PRO Dual Layer Protection (Black/Black) case (Fits AT&T, Sprint and Verizon iPhone 4 and 4S) with a the charging cable attached. Excellent - all my requirements met.

However, the suction cup is almost ridiculous the way it sticks to flat smooth surfaces. After the first application, it is not coming off without some time and effort prying it away (and, yes the suction lock lever was released). I would suggest using a crowbar. It might loosen it's grip with time as some debris accumulates on the surface but that's definitely not the case when new.

My initial plan was to store the mount in the glove box after each use but then I quickly realized that was just not practical. I applied it a second time and plan to leave it there until it falls off. I'm fairly sure the zombie...

Need more appointment... ?
What a great product for my Galaxy S3!
I am so very impressed by this car mount! I have a brand new Samsung Galaxy S III which is a pretty large phone. I have been searching for the right car mount forever and reading reviews of several different makers and models. This is the only one of which I couldn't find a complaint that it didn't fit or it was too wobbly or that the thing just didn't stick to the car surface well. And guess what? It's true! This is a firm holder that sticks like crazy (don't worry, it comes off ...eventually with a lot of muscle, it's just suction device so it won't harm you car interior). The only problem I had was I could get it to stick to the vinyl dash board of my Mini Cooper which is not exactly known for interior real estate. I finally decided on the plexi-glass that covers the gigantic speedometer in the center of my dashboard. It has held really well for a couple of days now, even in the heat of a 105 degree Southern California Summer. It makes me giddy thinking about how cool my car mount...
More information by clicking here.