Panavise In Dash Mount Nissan Rogue 08~10, Titan 04~08.5

Cheapest Panavise In Dash Mount Nissan Rogue 08~10, Titan 04~08.5


Brand New Panavise - Nissan Rogue InDash MountModel #: 751311508The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below.Co...

• Made in USA from 14 Gauge Steel, powder urethane coated
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

This Car Mounts give to us some advantages, like this :
1. Works for 2011 models as well
I purchased this for a 2011 Nissan Rogue, knowing that the style of the dash had changed slightly. Not to worry, this does work perfectly in the current year's model as well, although the position is slightly higher than that shown in the photo, but not by much.

The instructions on this are pretty abysmal, even for the prior years. It leaves out steps and while you can figure it out, it makes the job more difficult.

The instructions for 2011 should read:

1. Using a dash removal tool or a rigid piece of flat plastic (do not use metal), carefully pry up the shifter bezel, starting closest to the rear and then working to the two froward clips. These are quite stubborn, but once you have one out, the others are easier. Remove and set aside.
2. Using the dash tool, carefully pry out the climate control panel. Start at the bottom left and right, then once those have been removed, lift up and gently work out the panel until free. It's not necessary to...

2.

Need more appointment... ?

More information by clicking here.

Garmin Suction Cup Mount for Garmin nuvifone

Buy Garmin Suction Cup Mount for Garmin nuvifone


Our suction cup mount offers versatility for navigating with your nüvifone™. Simply suction your mount to the windshield or to the included adhesive dashboard disc, and you’re ready to go!

• GARMIN PARTS GARMIN REPLACEMENT SUCTION CUP MOUNT

This Car Mounts give to us some advantages, like this :
1. Great service
Great service. They sent the wrong thing at first, but immediately corrected the error in a friendly and speedy manner.

2. Very good purchase
I had lost the original, this was a perfect substitute for my Garmin 295w GPS and work very well in my car

Need more appointment... ?
Excellent!
This is exactly as described, works with G60 Nuviphone
and the Garmin 295W GPS(with WiFi).
Allows me to keep one mount in vehicle all the time and
have portable mount when in/on other vehicles.
More information by clicking here.

Panavise Custom InDash Mount for Honda Civic '99-00

Bargain Panavise Custom InDash Mount for Honda Civic '99-00


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. something to build on
This is one on several Panavise mounts I have had over the years. I've used this on conjunction with PanaVise Universal Phone Holder w/AMPS Adapter which holds our phone just fine.
Initially I used this with Velcro Products - Velcro - Industrial Strength Sticky-Back Hook & Loop Fastener Strips, 4 x 2, Black - Sold As 1 Pack - 50% stronger than standard hook and loop fasteners. - 2" width for firmer positioning. - Waterproof adhesion, even when submerged. - ...Velcro attached to my phone case and it worked fine.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Toyota Tacoma '05-07

Buy Panavise Custom InDash Mount for Toyota Tacoma '05-07


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

This Car Mounts give to us some advantages, like this :
1. Nice product, tight fit
Happy with the product but it was tough getting the HVAC controls back in on my 2013 tacoma. Took several attempts and I was worried about damaging the HVAC controls.

2. Installs in seconds.
Great for all kind of products. I add a XM Satellite Radio to my truck and didn't want to install it on the dash, this way I have closer access to the unit and makes changing channels a snap.

Need more appointment... ?
Great fit, but!
Great product. It fits great but it is little weak for holding an iPad. It shakes with the ipad on.
More information by clicking here.

Panavise Custom InDash Mount for Toyota Camry '07 (AT, MT)

Buy Panavise Custom InDash Mount for Toyota Camry '07 (AT, MT)


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Custom In Dash Mount
Although it was a little more difficult to install than I had anticipated, it certainly surpasses any suction or vent clip mount out there.

2.

Need more appointment... ?

More information by clicking here.

iShot® Mounts: Acer Iconia A500 Tablet Tripod Mount - Adapter - Holder - Bracket - Made in the U.s.a - Free Window Mount Included - NEW Lenovo Ideapad Tablet Accessories

Cheapest iShot® Mounts: Acer Iconia A500 Tablet Tripod Mount - Adapter - Holder - Bracket - Made in the U.s.a - Free Window Mount Included - NEW Lenovo Ideapad Tablet Accessories


NOW ASK YOURSELF, WHAT CAN I DO WITH MY NEW iShot 2in1 MOUNT? Well the answer is ...LOTS!
-Short-Film Producers
-Casino VIP Guest List Management
-Free-Lance Professional Photographers
-Golf Swing Professionals
-Family Group Pictures on tripod
on Holidays
on Birthdays....etc
Stunning HD Still Photos on tripod
Grand Canyon
Bahamas
Florida....etc
Flickr Video Fun with friends
Live HD Video on tripod
Weddings
Communions
Fishing
Golf Swing
Easy Upstream to YouTube
Live Video Blogging
Atta...

• Free 4" HD Suction Cup Included - Operating Instructions
• Attaches to ANY standard 1/4-20 tripod - 360 Degree Viewing Angles
• Front and Rear Cameras NOT Obstructed - Adjustable Design
• American Made - 100% Recycled Material
• First Tripod Mount ever invented for the Acer Incoia A500

This Car Mounts give to us some advantages, like this :
1. Cheap Expensive but it works.
I don't know how long it will last. I own two of these and they are cheap as hell should be more like 5 bucks instead of 50. I understand the market for these is really small so you can get a premium for them. Also I bought from the sellers website and they offered a pair of Beats headphones for like 90 bucks and they were fakes. If you need this product buy it but if you want to try it save your money.

2.

Need more appointment... ?

More information by clicking here.

Amzer 13-Inch Gooseneck Rotatable Car Windshield Suction Mount for Palm Pre

Deals for Amzer 13-Inch Gooseneck Rotatable Car Windshield Suction Mount for Palm Pre


This convenient mount includes a custom fit cradle, a 13 inch gooseneck suction cup mount and a 3M adhesive disc that is perfect for your new Palm Pre. Slip your device into the Custom Fit Cradle for a secure fit. Attach the Cradle to the adjustable suction cup mount and adhere the suction mount to your windshield. An 80 mm 3M adhesive disc is also included for mounting to your dashboard or console. The flexible gooseneck is easy to adjust to the perfect viewing position. Its as simple as that.....

• Designed specifically for your Palm Pre.
• Flexible neck and holder provides great hands-free option and provide perfect viewing position.
• Easily transferable from one vehicle to another.
• Best for Trucks, RVs, Vans or car with a long distance from the windshield to the front of the dash.
• Easy installation. No tools required.

This Car Mounts give to us some advantages, like this :
1. Works great with my Palm Pre!
Updated on 10/18/2010:

Unfortunately, the plastic piece that holds the phone itself and is separate from the mount is no longer holding the phone and my phone pops off as I'm driving. I contacted Amzer to inquire about a replacement of just the plastic piece which must cost pennies to make but was told I have to return the entire item to Amazon.com I can no longer recommend this product and would look for a more sturdy mount that holds the phone tighter.

Used this for the first time today in a MINI Cooper with my Palm Pre. Works great! There's space in the bracket to plug in the charger while I'm driving and the extra gooseneck length gives you mounting options. This thing is sturdy and does take both hands to bend the arm around. While I decided to mount on the windshield, it does come with what appears to be a dashboard mount as well. The picture is a little deceiving in that the side holders aren't nearly as big as pictured but it does hold the Pre in...

2. works well for 2011 Hyundai Sonata
I bought this for my wife, since she is very dependent on GPS for driving around. I liked the fact that this is long enough to reach from the base of the windshield to be at a convenient location close enough to the driver (next to the steering and half-arm length).

Taking 1 star away because initially the phone would fall off each time there was any road vibration: the arm would cantilever all over the place and the frame wasn't strong enough to hold the Pre. However moving the arm lower and flattening it against the dash seemed to solve that issue. The arm doesn't move as much and the phone hasn't fallen off since in nearly 1000 miles of driving. it would be nice if there was someone how a tighter clasp on the phone.

Agree with only other reviewer here: the photo is different from the actual device. The holder does not have such big "side wings" to hold the device in place. Once i solved the shaking issue, this seems like a thoughtfully designed product: you...

Need more appointment... ?

More information by clicking here.

Grippy Dash Mount with Rotating Holder for Motorola Droid X Mb810, Droid 2 A955, Droid A855

Cheap Grippy Dash Mount with Rotating Holder for Motorola Droid X Mb810, Droid 2 A955, Droid A855


The hassle free Naztech universal car dash-mount is the most convenient way to easily fit your electronics within reach. Adaptable with most applications, this extremely portable product uses high tech anti-skid materials to create a solid mounting base that works with any surfaces, while keeping your device from sliding. Thanks to the clever swivel-head, users can change between portrait and landscape position, adjusting viewing angles in seconds with only one hand. As an added feature, the Suc...

• Move from Car to Car & Easy Removal to Stop Theft
• Universal Design Securely Holds Most Portable Electronics
• Rotates 360º for Vertical or Landscape Viewing
• Quick Push Button Release
• Anti-skid Weighted Base

This Car Mounts give to us some advantages, like this :
1. Grippy Dash Mount with Rotating Holder for Motorola Droid X Mb810, Droid 2 A955, Droid A855
Been using this for years with my Motorola DroidX. This also works well with my new, larger phone, the Samsung Galaxy Note 2. Very satisfied. Never any problems and built to last. Would buy again.

2.

Need more appointment... ?

More information by clicking here.

ARKON SM521 Slim-Grip Lighter Socket Mount with Integrated Micro USB Charg

Cheap ARKON SM521 Slim-Grip Lighter Socket Mount with Integrated Micro USB Charg


Arkon's SM521 Lighter Socket Mount with additional power socket features the NEW Slim-Grip holder and is ideal for use with ALL versions of the iPhone including the iPhone 4, Samsung Galaxy S phones, Smartphone's with slide out keyboards like the Motorola Droid, Superphones like the EVO 4G, HTC HD2, HTC Desire Z, Droid X and devices like the BlackBerry that have keys and buttons on the side of the device. The Slim-Grip will hold your phone regardless of whether a protective skin or sleeve is use...

• No Tools Required
• Compact portable design
• Works in most vehicles
• Allows the use of your power charger while the mount is in place
• Works with devices with or without a skin or case
• 360 degree swivel and tilt feature for perfect viewing angle
• Additional power socket included
• Compatible with all Smartphones with or without a skin or case
• Compatible with most 12V power sockets
• Easy to install no tools required

This Car Mounts give to us some advantages, like this :
1. cell phone holder
It is handy, but it isn't very stable. The holder will not hold tight and moves out of reach. I had to buy something else.

2. NOT AS ADVERTISED
Ad said "Compatible with all Smartphones with or without a skin or case" - it does not fit my SAMSUNG Galaxy Note II. Also it DID NOT come with a "USB Charg" and had minimal assembly instructions.

Need more appointment... ?
Great phone holder for my Note 2
Quality construction and the only product that worked with my Samsung Galaxy Note 2. It is made of sturdy plastic and quality construction.
More information by clicking here.

Anti-Shock & Fully-Rotatable Vehicle Cup Holder Mount For Apple iPhone 4, 4S, 3G S, iPhone 5, iPhone 5S, iPhone 5C & iPod Touch

Cheapest Anti-Shock & Fully-Rotatable Vehicle Cup Holder Mount For Apple iPhone 4, 4S, 3G S, iPhone 5, iPhone 5S, iPhone 5C & iPod Touch


Introducing DURAGADGET's anti-shock, multi-purpose, adjustable and foam padded iPod and iPhone vehicle cup holder mount. Made from a tough, durable and high grade polymer with 360 degree rotation, this is a great accessory for your iPod or iPhone whilst driving! This holder is purpose built to be tough whilst you are out and about, allowing you to use GPS to map out your route, monitor your speed, or even simply for having your device close to hand in an emergency. Foam padding and adjustable ar...

• Complete 360° rotation and bendy stem allows you to find the perfect viewing angle for your iPod and iPhone
• Mount fixes directly into your car cup holder
• Quick release button extends the adjustable arms automatically, ensuring you get the perfect fit
• Anti-shake design provides maximum stability when in a moving vehicle
• Padded and cushioned side grip arm holds securely

This Car Mounts give to us some advantages, like this :
1. iphone cup holder review
The product is solidly constructed and seems to work well in the vehicle. We have had no issue with the phone falling out. It is shorter than the phone however, so laying the phone flat is not recommended. I fits the iphone nicely in a vertical position, but does feel like the phone can come out with no restraint across the front. The phone has not come out in three weeks of use however, so maybe it isn't needed. Also with no other restraint user has access to the phone (maybe to much!). We are looking forward to using it in a golf cart as my wife uses her phone as gps device for golf. Then it will be put to a test.

2.

Need more appointment... ?

More information by clicking here.

iBOLT iProDock Amps Plate Kit

Bargain iBOLT iProDock Amps Plate Kit


iBOLT iProDock ChargingDock Kit for Apple 30pin iPhone - Includes 3 connector housings to fit most Compatible with most Apple approved car chargers - Fits iPhone 4s, iPhone 4, iPhone 3G, iPhone 3GS, iPhone 3

• Keeps your device in a secure and easy to view position
• Stylish design & quality material - looks great in any car
• Compatible with most Apple approved car chargers
• Works with all vehicles and iPhone/iPod Touch models and most cases
• Zero install - Amps Plate options

This Car Mounts give to us some advantages, like this :
1. This holder is awesome.
Holder fits well in the car and keeps the phone tight and swivels just right. I'd put one in every car!

2. Worked great with my VSM
All the parts worked together just as described, and it's now the easiest thing about using my iPhone in the car!

Need more appointment... ?

More information by clicking here.

Amzer Bicycle Handlebar Mount for BlackBerry Storm 9000/9530 - Black

Cheapest Amzer Bicycle Handlebar Mount for BlackBerry Storm 9000/9530 - Black


Now you can take your BlackBerry Storm for a spin while cycling with Amzer’s Bicycle Handlebar Mount. Easy to install and no tools required, simply clamp and tighten the mount ring onto your handlebars or stem. Ideal for handlebars .75 inches to 1 inch in diameter. The swiveling head rotates the custom fit cradle and your device to the perfect viewing position and will lock into place. Safety first. With Amzer’s Bicycle Handlebar Mount for your BlackBerry Storm!

• Swiveling head rotates the custom fit cradle for perfect viewing of your BlackBerry Storm 9530.
• Mount allows movement left, right, or rotates 360 degree.
• Easily transferable from one Bicycle to another Bicycle.
• Suitable for handlebars between 0.75 inches to 1 inch in diameter.
• No tools required for installation.

This Car Mounts give to us some advantages, like this :
1. Works well once you modify the moutning clamp and your BlackBerry
Once mounted, my BlackBerry is in the perfect position on my bike. It's out of the way but easy to read, which is wonderful when you are using your GPS function. Also you can read email without having to remove the BlackBerry from the mount.

There are 2 problems with the item. First,the mount did not fit my handlebars. The clamp is too small and it's not sufficiently adjustable. I had to use plastic cable ties to make it work. Second, when in the mount, the Left Side Convenience Key on my BlackBerry is pushed down. I had to deactive the function to solve the problem.

Still, it's the best product I've found and it gets the job done.

2. Recommend with reservations
I agree that the handlebar mound is for much smaller handlebars with no easy adjustment. Secondly, the phone came flying out it I hit a small bump in the road. Had to use a cable tie to hold it on the mount.

Need more appointment... ?

More information by clicking here.

Duragadget Waterproof holder / case and bike mount for Sony Ericsson Xperia X8, Sony Ericsson Yendo, Sony Ericsson Cedar

Cheapest Duragadget Waterproof holder / case and bike mount for Sony Ericsson Xperia X8, Sony Ericsson Yendo, Sony Ericsson Cedar 

• Waterproof Bicycle mount holder case
• This high quality bicycle mount holder is an excellent way to mount your mobile phone whilst on your bike, it offers a wider range of movement to allow you to mount your phone sideways or in the best postion possible.
• The mount comes complete with a water tight bag to allow you to keep your phone c clean and water free! Ideal for people who have GPS on there phone and use it on bikes as well as their car!

This Car Mounts give to us some advantages, like this :
1. super-suouper
Hey ! Everything was okay, everything was fine, my item has arrived in the right time ! :D
thak you!
bye

2.

Need more appointment... ?

More information by clicking here.

Duragadget Waterproof holder / case and bike mount for Htc wildfire

Cheapest Duragadget Waterproof holder / case and bike mount for Htc wildfire

• Waterproof Bicycle mount holder case
• This high quality bicycle mount holder is an excellent way to mount your mobile phone whilst on your bike, it offers a wider range of movement to allow you to mount your phone sideways or in the best postion possible.
• The mount comes complete with a water tight bag to allow you to keep your phone c clean and water free! Ideal for people who have GPS on there phone and use it on bikes as well as their car!

This Car Mounts give to us some advantages, like this :
1. Doesn't Fit
The product does not fit on my road Bicycle's handlebar.
I can't fix it anyway.

Please see if it's compatible with your bike before you buy it.

Check with the seller about the compatibility.

Seems nicely made though.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Lexus IS250, 300, 350 '06

Cheap Panavise Custom InDash Mount for Lexus IS250, 300, 350 '06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Best mount solution for mobile devices
I have a 6" panavise arm attached to it and a Samsung 8" android tablet velcro'ed on the end. Works great except the mount only has one piece that mounts, so there is no other "leg" or other support item, which means you get a little bit of vibration. What I ended up doing was taking a piece of a wood dowel and wedged it between the mount and the lock for the glove box. It's only about 4" long and I can't see it while driving (it is noticeable from passenger side, but not bad). It takes out nearly all the vibrations. Having an 8" display for Waze is amazing versus the stock navigation unit.

2.

Need more appointment... ?

More information by clicking here.

High Grade BlackBerry Z10 Flexible Windshield Dash or Vent Mount Cradle Holder (for use with skin, bumper or hard case protector)

Deals for High Grade BlackBerry Z10 Flexible Windshield Dash or Vent Mount Cradle Holder (for use with skin, bumper or hard case protector)


The Digital Travelmount Windshield, Dashboard, and Removable Air Vent Mount with Mega Grip Holder for your BlackBerry Z10. The phone mount bundle includes three high quality pedestal mount options. Windshield suction pedestal and the removable air vent mount are ideal for use with GPS applications as they position your phone up high in the vehicle.

• This Digital Mega Grip Smartphone holder with Travelmount deluxe mini windshield suction pedestal and Removable swivel air vent pedestal is best alternative for hands-free
• Circular adhesive dashboard or console mounting disc for easy installation on Windshield, Dashboard, and Vent Mount
• Flexible arms let you insert and remove your BlackBerry Z10 with one hand
• No tools required! Choose from Suction mount, Dash Mount or Removable Air Vent Mount - use the one that works best for your vehicle
• Hold Your Devices Securely in your Car with Comfort Viewable Angles

This Car Mounts give to us some advantages, like this :
1. best cell mount ever!
Very impressed With this product. Once I used it in my work truck which rides horrible, I realized how great this product is. Would definately buy another one in the future! Very happy with it!

2. very good
Hello ,

i am very happy to use this item cuz it is so nice and usefull

and good to use in car and other place

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Subaru B9 Tribeca '06

Buy Panavise Custom InDash Mount for Subaru B9 Tribeca '06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Need a mount?
This is a black coated piece of metal. And if you need a professional looking mount that is easy this is exactly what you need.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Honda Odyssey '05-06

Cheap Panavise Custom InDash Mount for Honda Odyssey '05-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

This Car Mounts give to us some advantages, like this :
1. Works Perfect!
Installed on a 2008 Odyssey. It was fairly easy to install; It's stable and rugged an in the perfect place. The results are satisfying!

2. Great products
Works well. Installs very easy and in different combinations. A little vibration with the base but can be easily be fixed.

Need more appointment... ?
Excellent product.
I had this mount professionally installed in my wifes 2007 honda odyssey touring, and it looks great, works well, and puts the phone right where you want it. I have tried many other mounts including Proclip / brodit, and this is the only one that works.

Highly recommended
More information by clicking here.

Panavise Custom InDash Mount for Chrysler PT Cruiser '01-05

Bargain Panavise Custom InDash Mount for Chrysler PT Cruiser '01-05


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Works for me!
Mounts easily. I just use it to hang my Ipod. It gets it off the seat and off the console. Looks good too.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Dodge Caravan, Chrysler T&C, Plymouth Voyager '01-06

Deals for Panavise Custom InDash Mount for Dodge Caravan, Chrysler T&C, Plymouth Voyager '01-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included. Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

This Car Mounts give to us some advantages, like this :
1. Works Like A Charm!
I have used Panavise products many times over the years, and they were all excellent. This one was no exception. Installation was straightforward, and was completed in less than 5 minutes. I have tried other products, but NOTHING compares to Panavise!

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Lexus ES300 '02-03, ES330 '04-06

Bargain Panavise Custom InDash Mount for Lexus ES300 '02-03, ES330 '04-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Does the Job
Seems funny reveiwing a bracket, but after all, it has a job to do and this one does it well. I bought it for a 2003 Lexus ES300 to retrofit a charging saddle for my iPhone. This works as promised sliding in a seam on the dash. I had a company install all my components to do this and also make my iPhone so I can talk hands free. It fits and works as promised.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Acura TL '04-06

Deals for Panavise Custom InDash Mount for Acura TL '04-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Okay for small objects
This car mount is installed very easily. I did it in less than 5 minutes, but I've had the center console apart before. Its cut to fit well and the trim snaps back in place with no modifications. You should be able to remove it later with no trace it was there. The downside of this mount is that it isn't particularly stable. Its just a relativity thin sheet of steel on one axis and likes to vibrate on that axis (near vertical.) This might not be a problem if you're mounting a small device holder close to the mount plate. However is a issue with larger objects. I have a RAM system with a 3.5" arm attached to this plate and it likes to vibrate when the car is in motion. It doesn't make the GPS unusable or anything, but it does make fine text harder to read on the move. If you have a heavier device or particularly if you're using an arm mount I would think about getting a more secure mount plate.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Dodge Ram Van 1500, 2500, 3500 '98-02

Deals for Panavise Custom InDash Mount for Dodge Ram Van 1500, 2500, 3500 '98-02


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Panavise is high quality
I have multiple Panavise base mounts in cars and trucks. They are of high quality and do not ruin the dash with holes or glue. No need to worry about a suction cup coming loose from the window. Positions the phone (or GPS) at just the right angle for easy access.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Chevy Lumina'95-'00, Blazer '00, GMC Sonoma/Jimmy '98-'02, Pontiac Montana '99

Deals for Panavise Custom InDash Mount for Chevy Lumina'95-'00, Blazer '00, GMC Sonoma/Jimmy '98-'02, Pontiac Montana '99


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Fantastic
Sturdy and fits well. This thing does what it is says and thats it. More products should be this way.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Subaru Legacy,Sedan/Wagon '05-06,Outback '05-06

Bargain Panavise Custom InDash Mount for Subaru Legacy,Sedan/Wagon '05-06,Outback '05-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Does the job
I got this mount for my wife's 2005 legacy GT and use it with the Panavise 15575 phone holder. The car has the JDM climate control and an aftermarket 7" LCD Double din radio installed so the fit was not exact like it should be, but it still works fine.

Also, when I ride as a passaged being tall I have longer legs and I hit my leg on the mount if I am not care getting in to the car.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for VW Passat '01-05, Golf, GTI, Jetta '99-06

Cheap Panavise Custom InDash Mount for VW Passat '01-05, Golf, GTI, Jetta '99-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. Mounted easily
I put this on my 2003 Eurovan and it worked just as advertised. It's stable and has enough options to mount whatever you need.

2.

Need more appointment... ?

More information by clicking here.

Innovative Gomadic Brand Blackberry Curve Cup Holder Vehicle Mount - Expands to fit any auto / car cupholder comes with the Gomadic Lifetime Warranty

Cheapest Innovative Gomadic Brand Blackberry Curve Cup Holder Vehicle Mount - Expands to fit any auto / car cupholder comes with the Gomadic Lifetime Warranty


It is hard to find a vehicle nowadays that does not come with several cup holders placed in very convenient locations. Why not use one of these to hold your Blackberry Curve for clear visibility and fingertip access? With the Gomadic Brand Cupholder Mount for the Blackberry Curve it has never been easier to setup and hold your Blackberry in a safe, secure and professional looking manner. Simply place the base of the mount in the vehicle cupholder location, turn the adjustment dial, and watch as ...

• Mount includes a 360 degree integrated joint to easily rotate between landscape and portrait modes.
• The Gomadic Cupholder base expands in diameter to accommodate nearly every vehicle cupholder made. The circular base can expand from 2 1/2 inches diameter to upwards of 3 5/8 inches.
• The Gomadic Holder base is designed to support the Blackberry Curve device. Side grips and support feet configured to support precise dimensions (107 x 60.4 x 16.1 mm).
• Gomadic Holder can be highly customized to user specific viewing preferences. Side grips can be split and/or adjusted up or down. Support feet can rotate in or out from 0 to 180 degrees (and everything in between!)
• Special non-scratch and non-slide coating is used throughout the holder. Unlike many competitors, this product will not scratch or scuff your device.

This Car Mounts give to us some advantages, like this :
1. Works well in Jeep Cherokee, very flexible and adjustable
I like this much better than any of the dash-mounted holders I've used in the past. Very sturdy doesn't feel like it would come apart or the plastic would snap easily. My biggest concern was how adjustable the grips for the blackberry device would be. I use the "Otter Box" shell on my BB which is significantly larger than the standard BB skins/shells. I was pleased to find that the grips are extremely adjustable and my BB fit fine. The grips are so adjustable that my Garmin GPS fits in the grips as well!

2. GREAT Product!
This is a great product. It is so easy to install and it is sturdy and secure. It is easy secure and remove your phone and the flexible arm makes it easy to position the phone the most comfortable spot for you. Just recently my phone and this holder were stolen from my car. While the inconvenience of getting a new phone was bad, I was more upset about the loss of the holder.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Honda Civic 2006

Buy Panavise Custom InDash Mount for Honda Civic 2006


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. best cell phone mount for 8th gen
best phone device mount by far. install is easy and it works with docks and cradles from pro clip. you do have to take dash panels off and shave the lip of an unseen area during install.

2. Excellent!
Fit perfect on my car just as described! No issues with installation, worth the money! Good quality and fast service.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Toyota RAV4 '06

Buy Panavise Custom InDash Mount for Toyota RAV4 '06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone
• Click here to look-up your vehicle: www.panavise.com/f/comm/indash/idbrand.html

This Car Mounts give to us some advantages, like this :
1. A good solution.
I was looking for a good spot to mount my GPS so I decided to get this. It installs easily. There are two clips on the left panel piece. Starting from the bottom, use a panel removal tool and pry up. Once the first clip pops, pry the panel up. Then hit the top clip.

The screw to mount to is a simple phillips head standard screw. Mount the Paravise and then pop the panel back on and you're done. My complaint is that the bracket doesn't sit totally flush to the left which makes getting the panel back on tricky. It also vibrates a bit over bumpy roads which can get annoying.

Depending on what you're mounting, it may block the path between you and your AC vent which is also troubling. It sticks out enough though to make easy clearance with the instrument gauges though which is good.

All in all, it's a nice little piece and it doesn't require you drilling holes. I like it

2. Just what I was looking for...
It is very stable and easy to install. Although the piece for the holder was not angled correctly (it faced too much upward so I got the sun glare) but I purchased the ball mount and that fixed it.

Need more appointment... ?

More information by clicking here.

Xenda Universal Car Mount Lighter Charger Socket Plug in Holder Dock with Dual Charging USB Ports for MetroPCS Huawei Activa LTE 4G, LG Connect 4G, LG Esteem, Samsung Galaxy Attain 4G, ZTE Score M

Cheapest Xenda Universal Car Mount Lighter Charger Socket Plug in Holder Dock with Dual Charging USB Ports for MetroPCS Huawei Activa LTE 4G, LG Connect 4G, LG Esteem, Samsung Galaxy Attain 4G, ZTE Score M


Phone Holder Series provide safe and secure solution for your PDA Smartphone or any handheld, devices. Slide arms of the holder can be adjusted for universal fitting of a desired device. Two USB charging ports allow you to charge your devices, getting rid of need for a separate car charger. It plugs into any cigarette lighter or 12-volt power receptacle and tightens instantly with a clockwise turn. The neck, made of flexible aluminum, can be adjusted to optimize viewing. Cigarette lighter car ph...

• XENDA(TM) Brand Car Mount. 2 in 1 car charger and holder, Cigarette lighter adapter with Dual Charging USB ports.
• One usb port (1A) can charge a smart phone, PDAs; another usb port (2A) can charge your iPad/Tablet/Smart Phone at the same time. Able to connect adapter through lighter socket connection (12/24V DC). Phone can be used during charging.
• Flexible neck can be twisted and bended to position the holder at easy to reach positions.
• Easy to install no tools required. Full 360 degree rotation in either direction. Adjustable to both Portrait and Landscape.
• USB Cable sold separately and NOT included.

This Car Mounts give to us some advantages, like this :
1. good product
Great and quick service and I am a happy customer. All was as I expected it and I enjoy it.

2.

Need more appointment... ?

More information by clicking here.

BoxWave Motorola Droid X2 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Motorola Droid X2

Bargain BoxWave Motorola Droid X2 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Motorola Droid X2


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your Motorola Droid X2 securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your Motorola Droid X2 with the 360-degree, ball-joint rotating, TinyMount. A simple twist of the TinyMount l...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. Overall good price but a big flaw in the design
I loved this cover for my phone but u must still buy a screen protector for ur phone also, the MAJOR FLAW is that it doesn't have an opening for where the charger needs to go into ur phone so when u charge it u have to open the bottom which is held together by VELCRO as a result now mine has become kind of loose/slack in that spot from opening it every day while charging.

2.

Need more appointment... ?

More information by clicking here.

Blackberry Tour Windshield Mount for the Car / Auto - Flexible Suction Cup Cradle Holder for the Vehicle

Deals for Blackberry Tour Windshield Mount for the Car / Auto - Flexible Suction Cup Cradle Holder for the Vehicle


Whether you are on a cross-country road trip or the daily commute to the office, there is a lot of convenience to having clear visibility and fingertip access to your Blackberry Tour. The Gomadic Flexible Windshield Mount for the Blackberry Tour will work in every car, will set up (and store) in seconds and will hold your device in a safe and secure manner. Extra attention was made to the construction of the flexible suction cup-based gooseneck mount to ensure that it not only adhered to the win...

• Grips on sides and bottom of holder can be easily adjusted (up, down, left and right) to tailor viewing position to meet customer requirements. User will always have access to all controls and input/output ports.
• Uniquely designed cradle base for use with the Blackberry Tour device. Adjustable grips and feet adjust to precise device dimensions (111.96 x 61.36 x 15.24 mm).
• Extra-firm, flexible gooseneck absorbs vibration to provide a very stable viewing environment. Gooseneck length is 7"" (65mm)
• 0.5 inch thick foam pads are made of high density and heavy duty materials to safely and securely grip device.
• Specifications: Holder Base: (2.5 X 4.0 inch closed position. Highly expandable), Windshield Mount (6.5 inch flexible gooseneck), Weight (Base 4oz., Mount 3oz.)

This Car Mounts give to us some advantages, like this :
1. Works Great
I have had this for over a year now. I have no complaints what so ever. It works like a champ!

2.

Need more appointment... ?

More information by clicking here.

BoxWave Samsung Captivate Glide TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Samsung Captivate Glide

Cheapest BoxWave Samsung Captivate Glide TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Samsung Captivate Glide


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your Samsung Captivate Glide securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your Samsung Captivate Glide with the 360-degree, ball-joint rotating, TinyMount. A simple twist of the...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. Good while it lasted.
I received this product quickly after ordering it and was very satisfied with the design. I needed something to hold my smart phone in my car and it worked very well with the limited places I could put it. Well, that was until it broke. Only six months of very mild use and the device broke at the ball joint. I say mild use because I never really moved it around. I only put the phone in and out of the spring loaded clamp. This time I wanted to pivot my device so I could get to a knob behind it and it instantly snapped. The device was not forced roughly or anything like that. Since it was in my car, I believe any heat could have made the plastic weaker. Since it was plastic, I can't expect it to last forever; but I do expect to get more that six months out of it. I really wish companies would stop making so many disposable products.

BTW, there is only a 30 day guarantee, of course.

2.

Need more appointment... ?

More information by clicking here.

Motorola MILESTONE XT720 Windshield Mount for the Car / Auto - Flexible Suction Cup Cradle Holder for the Vehicle

Cheap Motorola MILESTONE XT720 Windshield Mount for the Car / Auto - Flexible Suction Cup Cradle Holder for the Vehicle


Whether you are on a cross-country road trip or the daily commute to the office, there is a lot of convenience to having clear visibility and fingertip access to your Motorola MILESTONE XT720. The Gomadic Flexible Windshield Mount for the Motorola MILESTONE XT720 will work in every car, will set up (and store) in seconds and will hold your device in a safe and secure manner. Extra attention was made to the construction of the flexible suction cup-based gooseneck mount to ensure that it not only ...

• Grips on sides and bottom of holder can be easily adjusted (up, down, left and right) to tailor viewing position to meet customer requirements. User will always have access to all controls and input/output ports.
• Extra-firm, flexible gooseneck absorbs vibration to provide a very stable viewing environment. Gooseneck length is 7"" (65mm)
• Uniquely designed cradle base for use with the Motorola MILESTONE XT720 device. Adjustable grips and feet adjust to precise device dimensions (116.8 x 61.7 x 11.3 mm).
• Holder is carefully designed to not scratch the Motorola MILESTONE XT720. All surfaces that touch device are lined with non-slip and non-scratch materials.
• Large suction cup diameter ensures a secure grip to the windshield and integrated suction lever creates solid vacuum to prevent accidental release.

This Car Mounts give to us some advantages, like this :
1. Great Phone Holder
Fantastic fit for various sized electronics. Well Constructed and easy to change from car to car if necessary. Overall great purchase!

2.

Need more appointment... ?

More information by clicking here.

BoxWave Blackberry Bold 9780 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Blackberry Bold 9780

Cheapest BoxWave Blackberry Bold 9780 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Blackberry Bold 9780


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your Blackberry Bold 9780 securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your Blackberry Bold 9780 with the 360-degree, ball-joint rotating, TinyMount. A simple twist of the TinyM...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. great quality, super fast shipping
I adore this little case, that I'm using for my iphone. It has magnetic closures, and a little pocket you can put your driver's license in (careful no credit/debit cards or hotel card keys! the magnets can demagnetize them).

The leather is a nice high quality soft white leather. The price was unbeatable. I'm planning on purchasing several more identical cases for when this one gets dirty and wears out.

2.

Need more appointment... ?

More information by clicking here.

BoxWave Blackberry Torch 9810 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Blackberry Torch 9810

Deals for BoxWave Blackberry Torch 9810 TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Blackberry Torch 9810


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your Blackberry Torch 9810 securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your Blackberry Torch 9810 with the 360-degree, ball-joint rotating, TinyMount. A simple twist of the Tin...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. Very satisfied. Incredibly fast delivery!
I thought I would have to wait forever for this item but in appeared in a couple of days. Form, fit and function perfect. Fit my iPhone perfectly. Very happy.

2.

Need more appointment... ?

More information by clicking here.

BoxWave HTC TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for HTC EVO 4G, HTC Amaze 4G, HTC Inspire 4G, HTC One S, HTC One V, HTC One X, HTC Sensation 4G, HTC Titan, HTC Vivid

Buy BoxWave HTC TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for HTC EVO 4G, HTC Amaze 4G, HTC Inspire 4G, HTC One S, HTC One V, HTC One X, HTC Sensation 4G, HTC Titan, HTC Vivid


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your HTC HD7 securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your HTC HD7 with the 360-degree, ball-joint rotating, TinyMount. A simple twist of the TinyMount locks the suction bas...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. Beautiful design
The design is really great. It does present the bracket nicely holds and presents my phone beautifully. The suction design works great for me. You do have to provide a stable flat surface to stick a disc somewhere to attach the sucker to. The form factor is deceivingly small which is wonderful so not to cut into view out of the car. Excellent.

2. Tiny Awesomeness!!
I love this thing...Its small enough to hold the phone just right in any position. Way better option then having buy a dock for each specific phone every time i change my phone. I bough a HTC nexus one dock spent $80 then almost bought a HTC one X dock for like $40 which turned out to be really huge so returned that and didn't wanna spend another $60 on the One X specific dock, esp. since im thinking about getting the Galaxy S3 at some point. This dock is perfect fits any phone. Pair this with a ProClip Product and you're good.

Need more appointment... ?
poor glue
Very disappointed! it keeps on falling from dashboard .Better glue to secure it would make it excellent. I had to plaster it with "crazy glue and foam tape" not fun.
More information by clicking here.

BoxWave Motorola DROID RAZR MAXX TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Motorola DROID RAZR MAXX

Buy BoxWave Motorola DROID RAZR MAXX TinyMount - Fully Adjustable, 360 Degree Rotatable Windshield Car Mount Holder for Motorola DROID RAZR MAXX


Who says our phones have no place in the car? Obviously these nay-sayers have never seen the TinyMount from BoxWave. Mount your Motorola DROID RAZR MAXX securely to your car's windshield for the perfect blend of safe viewing and phone convenience. With the diverse functionality of our smartphones and the flexibility of our TinyMount, there really is no need for additional in-car gadgets.Partner your Motorola DROID RAZR MAXX with the 360-degree, ball-joint rotating, TinyMount. A simple twist of t...

• Two piece construction, joined seamlessly together with a 360-degree rotating ball joint
• Expandable front clip-in bracket adjusts to a variety of device widths and thicknesses
• Once in, the padded, retractable brackets hold the device securely and safely
• Attach the TinyMount to your windshield or window using the suction cup with a simple twist to the right, and unstick it with a quick twist to the left
• Highly adjustable, the TinyMount has two rotating points, each allowing their own 360-degree movement, for a perfectly customized view

This Car Mounts give to us some advantages, like this :
1. Didnt care for the swivel
I thought this would be great for my razar maxx but didn't fit well on my windshield and ph just seemed to be to big. After a couple of uses the base came off! Ended up buying a new different model through verizon itself.

2. Nice little windshield mount
This is a nice little inexpensive windshield mount which I use for my Droid Razr Maxx. Fits snugly and makes my navigation and other droid based apps available. While I have navigation built-in to my own car, when I'm travelling and renting a car I usually have to also rent a navigation system. Now I can forego that extra cost and still get good navigation and traffic alerts on my cell. Because the mount is light and foldable and I can carry it easily in a pocket or my briefcase, it's a good addition to my road warrior arsenal. I recommend this product.

**Additional info: Its been a month or two since I bought this product and it also works well with my daughter's iPhone so I gave it to her and I will happily buy another one. One of my best purchases. **

Need more appointment... ?
exactly what I wanted
Having recently broken the official Motorola car dock for my previous phone, a Droid 2, because I'd overtightened one of the joints in an attempt to keep the thing from jiggling all the time, I wanted a sturdier replacement for my new Droid Razr. The Boxwave TinyMount is the ideal replacement. It holds the phone securely, with very little jiggle, because the only joint is quite snug & stable. It adjusts easily & has a much lower profile than my previous dock, so there's less obstruction of my view.

My only suggestion for improvement, would be one or two small channels into which I could route the USB & audio jack cables to keep them easily & neatly accessible. My current solution, wrapping the cables around the joint of the mount, is acceptable but messy.

I would wholeheartedly recommend this product to anyone.
More information by clicking here.

Cellularfactory Samsung Galaxy S 4G Sgh-T959V Vibrant Oem Samsung Window Mount Ecs-M979Begsta

Cheapest Cellularfactory Samsung Galaxy S 4G Sgh-T959V Vibrant Oem Samsung Window Mount Ecs-M979Begsta


OEM Samsung Window Mount Hit the road with a windshield mount for your GPS. Clip the holder onto your car using a vacuum base and adjustable side-grip support arms. Users can safely and securely attach their GPS to any vehicle's windshield without the use of messy adhesives. Compact and lightweight design. The flexible arm can be adjusted to any angle for easy viewing. SPECIFICATIONS: Type: Samsung OEM Product Part#: ECS-M979BEGSTA Product Weight: 5 ozProduct Color: Black Material: Lightweight h...

• Fitted cradle secures cell phone during bumpy rides.
• Fully adjustable, multi-angle neck for dashboard or windshield mounting.
• Lever-lock suction cup secures dock to windshield or dashboard.
• Pass-through micro USB port allows charging while docked; Phone detects mount and automatically switches to vehicle mode.
• Supports speakerphone, GPS navigation, Google Voice Search and your favorite apps.

This Car Mounts give to us some advantages, like this :
1. This car dock would get 5 stars, if...
I just got this nice car dock for the Samsung Vibrant today. While the design and manufacturing are great and go very well with the style of the Vibrant phone itself, I am still very dissappoint by the product.

The reason for this is very simple and hopefully will get fixed in the future: The original headphone 3.5mm jack is not accessible while the phone sits in the cradle. This should not be a problem, since there is a line out jack on the cradle itself, too! However, currently the jack is not operational! It is actually mentioned on the packaging and the manual, but is still frustrating. The reason for this is, that the line out jack is not a feed through of the headphone jack of the phone, but is somehow wired to the Micro-USB connector of the phone. Unfortunately, the Vibrant is not able to make use of this line out wired over the USB until it will have received a software upgrade to Android 2.2 aka Froyo. While this should not be in a too distant future it is still...

2. It really does work!
At first I couldn't get the audio output to work and left a negative review that I had retract. I went back out to my car and I guess maybe the jack wasn't all the way in the first time, but it works now! YAY!

**LET ME ADD for those who say this does not work with the Android 2.2 upgrade...When inserting the phone into the cradle be SURE that you press the micro USB port so that it is securely attached to your phone. That was what I did wrong the first few tries and it would not play music. Once I relized that the USB port on the cradle slides up and down I knew what I did wrong.

This window mount looks great in the car. Phone is easily accessible and no more taking my eyes off the road while I am driving. Great product!

Need more appointment... ?
It works!
As most know, Samsung (seemingly) took plenty of time in rolling out the various updates, with the good news being that everything seems to work. Tried it out this AM along with Vlingo (voice control), Google Nav, & the built in music player - they all performed as advertised. I think I can finally retire the Garmin...
More information by clicking here.

Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for Samsung Galaxy S 3 SGH-T999, Conquer 4G, Illusion, Galaxy Nexus (LTE), Stratosphere, Galaxy S 3 SCH-I535, Captivate Glide, Galaxy S 3 GT-i9300

Cheapest Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for Samsung Galaxy S 3 SGH-T999, Conquer 4G, Illusion, Galaxy Nexus (LTE), Stratosphere, Galaxy S 3 SCH-I535, Captivate Glide, Galaxy S 3 GT-i9300


Phone Holder Series provide safe and secure solution for your PDA Smartphone or any handheld, devices. Slide arms of the holder can be adjusted for universal fitting of a desired device. A USB charging port allows you to charge your device, getting rid of need for a separate car charger. It plugs into any cigarette lighter or 12-volt power receptacle and tightens instantly with a clockwise turn. The neck, made of flexible aluminum, can be adjusted to optimize viewing.Cigarette lighter car phone ...

• Fonus Universal Car holder with charging usb port for most smartphones. Adjustable to fit most smartphones. Flexible long neck can be twisted and bended to position the holder at easy to reach positions.
• Modern design with adjustable gooseneck. Holder rotates 360 degrees. USB charging port with high efficiency. Flexible goose-neck arm.
• Able to connect adapter through lighter socket connection (12/24V DC). Phone can be used during charging. USB Cable sold separately and NOT included.

This Car Mounts give to us some advantages, like this :
1. It's okay
This item worked really well with my gs3; however after about 5-6 months the stem started slipping over from side to side; the area right above where you tighten the joint. It shouldn't have done that. & I'm using for a usb charger. It won't hold up my phone any more, but is still useful. I have a 2006 Nissan Altima & where my lighter is located I had to really bend this mount in sn odd way. It would have been helpful if I could have adjusted the height.

2.

Need more appointment... ?

More information by clicking here.

Gomadic Brand Flexible Car Auto Windshield Holder Mount for the T-Mobile G1 Google - Gooseneck Suction Cup Style Cradle

Deals for Gomadic Brand Flexible Car Auto Windshield Holder Mount for the T-Mobile G1 Google - Gooseneck Suction Cup Style Cradle


Whether you are on a cross-country road trip or the daily commute to the office, there is a lot of convenience to having clear visibility and fingertip access to your T-Mobile G1 Google. The Gomadic Flexible Windshield Mount for the T-Mobile G1 Google will work in every car, will set up (and store) in seconds and will hold your device in a safe and secure manner. Extra attention was made to the construction of the flexible suction cup-based gooseneck mount to ensure that it not only adhered to t...

• Uniquely designed cradle base for use with the T-Mobile G1 Google device. Adjustable grips and feet adjust to precise device dimensions (117.6 x 56 x 17.5 mm).
• Extra-firm, flexible gooseneck absorbs vibration to provide a very stable viewing environment. Gooseneck length is 7"" (65mm)
• Grips on sides and bottom of holder can be easily adjusted (up, down, left and right) to tailor viewing position to meet customer requirements. User will always have access to all controls and input/output ports.
• 0.5 inch thick foam pads are made of high density and heavy duty materials to safely and securely grip device.
• Cradle is very easy to operate. Integrated quick release mechanisms enables fast setup and storage.

This Car Mounts give to us some advantages, like this :
1. An effective generic device holder
I've used this product with two different phones now. It is versatile because it is deep and has a wide range of motion for the clamps. The rubber inside the clamps holds devices securely. It isn't the prettiest of holders however.

2.

Need more appointment... ?

More information by clicking here.

Gomadic Brand Flexible Car Auto Windshield Holder Mount for the Samsung Nexus S - Gooseneck Suction Cup Style Cradle

Cheap Gomadic Brand Flexible Car Auto Windshield Holder Mount for the Samsung Nexus S - Gooseneck Suction Cup Style Cradle


Whether you are on a cross-country road trip or the daily commute to the office, there is a lot of convenience to having clear visibility and fingertip access to your Samsung Nexus S. The Gomadic Flexible Windshield Mount for the Samsung Nexus S will work in every car, will set up (and store) in seconds and will hold your device in a safe and secure manner. Extra attention was made to the construction of the flexible suction cup-based gooseneck mount to ensure that it not only adhered to the win...

• Uniquely designed cradle base for use with the Samsung Nexus S device. Adjustable grips and feet adjust to precise device dimensions (124.6 x 63.3 x 11.68 mm).
• Grips on sides and bottom of holder can be easily adjusted (up, down, left and right) to tailor viewing position to meet customer requirements. User will always have access to all controls and input/output ports.
• Extra-firm, flexible gooseneck absorbs vibration to provide a very stable viewing environment. Gooseneck length is 7"" (65mm)
• Gomadic Windshield Mount supports both landscape and portrait viewing modes. Mount easily rotates between positions.
• 0.5 inch thick foam pads are made of high density and heavy duty materials to safely and securely grip device.

This Car Mounts give to us some advantages, like this :
1. My second one
A while back I got one of these for my wife for her Galaxy Nexus (also worked for her Motorola Razr M) for our Odyssey. It fit perfectly into the side window. It also held my Nexus S without problems. The suction cup mount works very well and it has never come off. Be sure to clean your windshield mounting surface with rubbing alcohol or similar before mounting to ensure the most secure mount.

2.

Need more appointment... ?

More information by clicking here.

Panavise Custom InDash Mount for Cadillac Escalade '02-06, ESV '03-06, EXT '02-06, Chevrolet Avalanche '02-06, C-K Pickup '00-06, Silverado '99-07, Suburban, Tahoe '00-06, GMC Sierra '99-07, Yukon '00-06

Bargain Panavise Custom InDash Mount for Cadillac Escalade '02-06, ESV '03-06, EXT '02-06, Chevrolet Avalanche '02-06, C-K Pickup '00-06, Silverado '99-07, Suburban, Tahoe '00-06, GMC Sierra '99-07, Yukon '00-06


Panavise InDash custom mount eliminates exposed holes in vehicle. For clean, easy, nearly invisible phone mount installation. In most cases these brackets are the only way to properly install your cellular phone or hands-free kit without entering the airbag deployment zone! Professional Installation Recommend. Made in USA from heavy gauge steel. Complete instructions included.

• Made in USA from 14 Gauge Steel, powder urethane coated, color is carbide black
• Professional Installation Recommend
• For clean, easy, nearly invisible phone mount installation
• Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

This Car Mounts give to us some advantages, like this :
1. iPhone off the floor
This well-made mount far exceeds my expectations, is ruggedly built, and well designed. I coupled my Life Proof belt clip with it using serious double stick automotive tape (the black stuff) and now my phone is safe and secure in my FJ.

Love this and installed another on the passenger side for my lovely bride and turned my brother on to it for his Silverado dually.

A must have.

2.

Need more appointment... ?

More information by clicking here.

Innovative Vent Cradle Vehicle Mount for the Samsung Strive SGH-A687 - Adjustable Vent Clip Holder for Most Car / Auto Vent Systems

Buy Innovative Vent Cradle Vehicle Mount for the Samsung Strive SGH-A687 - Adjustable Vent Clip Holder for Most Car / Auto Vent Systems


The Gomadic Vent Mount is one of the easiest ways to have a very professional factory-installed appearance for your Samsung Strive SGH-A687. Simple to install and nearly universally compatible with all vehicle air vent systems, the vent mount will safely and securely hold your Samsung Strive SGH-A687. Designed with highly adjustable support mechanisms in both the spring loaded vent clips as well as the cradle holder adjusters, users can easily customize the device viewing angle to their exact sp...

• Gomadic Holder is highly adjustable with sliding/rotating mechanisms on side and bottom ensuring easy access to all Samsung Strive SGH-A687 buttons and controls.
• A vent mounted cradle base for use with the Samsung Strive SGH-A687 device. Holder is designed to adjust to accommodate the exact required dimensions (106.4 x 59.6 x 14.3 mm).
• Spring loaded vent clips designed to accommodate both horizontal and vertical oriented air vent systems.
• Engineered using non-scratch and non-slip materials on all contact surfaces.
• Heavy Duty foam pads (0.5 inch thick) line grips on side of holder. Made with high density construction compress to secure device when in use.

This Car Mounts give to us some advantages, like this :
1. Phone holder
I have a small car and never enough space in it; I am always in search of items that allow me to utilize my small space efficiently. This product is great because it puts my phone in a safe line of sight and always within reach, no more fishing for my phone, I love it!

2.

Need more appointment... ?

More information by clicking here.

Innovative Vent Cradle Vehicle Mount for the Blackberry Storm - Adjustable Vent Clip Holder for Most Car / Auto Vent Systems

Bargain Innovative Vent Cradle Vehicle Mount for the Blackberry Storm - Adjustable Vent Clip Holder for Most Car / Auto Vent Systems


The Gomadic Vent Mount is one of the easiest ways to have a very professional factory-installed appearance for your Blackberry Storm. Simple to install and nearly universally compatible with all vehicle air vent systems, the vent mount will safely and securely hold your Blackberry Storm. Designed with highly adjustable support mechanisms in both the spring loaded vent clips as well as the cradle holder adjusters, users can easily customize the device viewing angle to their exact specification. U...

• A vent mounted cradle base for use with the Blackberry Storm device. Holder is designed to adjust to accommodate the exact required dimensions (113 x 63 x 14.6 mm).
• Gomadic Holder is highly adjustable with sliding/rotating mechanisms on side and bottom ensuring easy access to all Blackberry Storm buttons and controls.
• Spring loaded vent clips designed to accommodate both horizontal and vertical oriented air vent systems.
• Three point mounting mechanism provides additional stability and control over viewing angle. Mount is easy to remove and carefully designed to not damage air vent louvers.
• Integrated rotational joint on spring loaded vent clips provide support for both landscape and portrait viewing modes.

This Car Mounts give to us some advantages, like this :
1. Works but a little on the flimsy side
This works okay. I like using it in the car because I use my Storm as a GPS. When I am using it as a GPS and recharging it and making a phone call, it overheats, so I keep it mounted against the vent with the AC on and that cools it down (a very low-tech solution).

The mount does not tilt. It only rotates, so I can't get an ideal viewing angle for the GPS. Maybe it'll work better in your car. Also, the whole thing is flimsy and whenever I put my phone in, I hold my breath until I know that I haven't broken it. I didn't want to pay for the "pro" car mounts, so I got what I paid for. (Actually I'd say it was about $10 more than what it should be). At any rate, it still works.

2. Syed
The product is good and fits well on the air vents and I would like to thank Gomadic for sending me the replacement clips. The purchase had been satisfactory.

Need more appointment... ?

More information by clicking here.

Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for HTC Nexus One, HD7, Merge, G2, Freestyle, myTouch 4G Slide, Titan, Droid Incredible, HD7S, One XL, MyTouch 4G, Surround, Desire, Status, HD2

Buy Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for HTC Nexus One, HD7, Merge, G2, Freestyle, myTouch 4G Slide, Titan, Droid Incredible, HD7S, One XL, MyTouch 4G, Surround, Desire, Status, HD2


Phone Holder Series provide safe and secure solution for your PDA Smartphone or any handheld, devices. Slide arms of the holder can be adjusted for universal fitting of a desired device. A USB charging port allows you to charge your device, getting rid of need for a separate car charger. It plugs into any cigarette lighter or 12-volt power receptacle and tightens instantly with a clockwise turn. The neck, made of flexible aluminum, can be adjusted to optimize viewing.Cigarette lighter car phone ...

• Fonus Universal Car holder with charging usb port for most smartphones. Adjustable to fit most smartphones. Flexible long neck can be twisted and bended to position the holder at easy to reach positions.
• Modern design with adjustable gooseneck. Holder rotates 360 degrees. USB charging port with high efficiency. Flexible goose-neck arm.
• Able to connect adapter through lighter socket connection (12/24V DC). Phone can be used during charging. USB Cable sold separately and NOT included.

This Car Mounts give to us some advantages, like this :
1. good product
Buying the product for my girlfriend was a good investment. Its sturdy and just as described by seller. Only problem i have with is that the neck tends to get loose after a bit. Am usually too afraid i might break it if i over tighten it but other than that, its good.

2.

Need more appointment... ?

More information by clicking here.

Nokia Lumia 920 Vent Vehicle Mount Cradle - Unique Auto Car Holder Clips into Air Vents. Lifetime Warranty

Buy Nokia Lumia 920 Vent Vehicle Mount Cradle - Unique Auto Car Holder Clips into Air Vents. Lifetime Warranty


The Gomadic Vent Mount is one of the easiest ways to have a very professional factory-installed appearance for your Nokia Lumia 920. Simple to install and nearly universally compatible with all vehicle air vent systems, the vent mount will safely and securely hold your Nokia Lumia 920. Designed with highly adjustable support mechanisms in both the spring loaded vent clips as well as the cradle holder adjusters, users can easily customize the device viewing angle to their exact specification. Uni...

• Spring loaded vent clips designed to accommodate both horizontal and vertical oriented air vent systems.
• Gomadic Holder is highly adjustable with sliding/rotating mechanisms on side and bottom ensuring easy access to all Nokia Lumia 920 buttons and controls.
• A vent mounted cradle base for use with the Nokia Lumia 920 device. Holder is designed to adjust to accommodate the exact required dimensions (130.3 x 71.4 x 11 mm).
• Engineered using non-scratch and non-slip materials on all contact surfaces.
• Three point mounting mechanism provides additional stability and control over viewing angle. Mount is easy to remove and carefully designed to not damage air vent louvers.

This Car Mounts give to us some advantages, like this :
1. It works perfectly .. even with the case
it works perfectly ,, and it does exactly what is says... highly recommended item.. i bought different product previously but this one is far more better ,,

2.

Need more appointment... ?

More information by clicking here.

Duragadget Waterproof Holder / Case And Bike Mount For Samsung Galaxy Ace 2, Galaxy Ace, Galaxy S2 Wave 2, Galaxy Nexus

Cheap Duragadget Waterproof Holder / Case And Bike Mount For Samsung Galaxy Ace 2, Galaxy Ace, Galaxy S2 Wave 2, Galaxy Nexus

• Waterproof Bicycle mount holder case
• This high quality bicycle mount holder is an excellent way to mount your mobile phone whilst on your bike, it offers a wider range of movement to allow you to mount your phone sideways or in the best postion possible.
• The mount comes complete with a water tight bag to allow you to keep your phone c clean and water free! Ideal for people who have GPS on there phone and use it on bikes as well as their car!

This Car Mounts give to us some advantages, like this :
1. Nice holder but useless in the sun.
Bought this to track my bike outings with my Samsung cell phone. 1st problem was that my handlebars are way too thick for the clamp to fit unless I slide it all the way to the end where it interferes with the shifter. I thought of returning it right then and there but with a little modification I got it to fit. Cool, let's go riding!
I loaded up my Sports Tracker app on my phone and headed out. Got about 100ft from the house when I got out of the treeline and into the sun. The plastic cover turned into a mirror from the sunlight and the phone was thereby useless. In between shaded areas I was able to see the screen lightly but I really didn't want to take that much time with my eyes off the road to see the map I had laid out for my trip. So I did an alternate route and skipped my planned one for today. As I rode along mapless I thought I could cut off the front vinyl to see the phone better but then there goes the protection. Additionally, the headphone jack on my phone is on...

2. Excellent cell phone holder!
Got this for my husband, who is an avid "rider" - mountain bikes, road bikes, dirt bikes, 4-wheelers, and snowmobiles. It's currently in use on a big snowmobile trip - the guys were super excited to be able to load all the trail maps onto the smartphone, and then have them available right on the handlebars. Great for protecting that expensive phone and also has some extra room for keys and such.

The company was super great to work with too, measuring the case to make sure it would work for my husband's particular phone before I ordered it. Then they shipped it right away! I'm sure his buddies will be buying this case too.

Need more appointment... ?
Not that great
It doesn't fit the Samsung Galaxy III. It isn't long enough and the location of the place to switch the phone on is in the wrong place. I think this is for an iphone.
More information by clicking here.

Innovative Gomadic Brand HTC Touch Diamond Pro Cup Holder Vehicle Mount - Expands to fit any auto / car cupholder comes with the Gomadic Lifetime Warranty

Cheap Innovative Gomadic Brand HTC Touch Diamond Pro Cup Holder Vehicle Mount - Expands to fit any auto / car cupholder comes with the Gomadic Lifetime Warranty


It is hard to find a vehicle nowadays that does not come with several cup holders placed in very convenient locations. Why not use one of these to hold your HTC Touch Diamond Pro for clear visibility and fingertip access? With the Gomadic Brand Cupholder Mount for the HTC Touch Diamond Pro it has never been easier to setup and hold your HTC in a safe, secure and professional looking manner. Simply place the base of the mount in the vehicle cupholder location, turn the adjustment dial, and watch ...

• The Gomadic Holder base is designed to support the HTC Touch Diamond Pro device. Side grips and support feet configured to support precise dimensions (102.5 x 51.3 x 18.4 mm).
• The Gomadic Cupholder base expands in diameter to accommodate nearly every vehicle cupholder made. The circular base can expand from 2 1/2 inches diameter to upwards of 3 5/8 inches.
• Mount includes a 360 degree integrated joint to easily rotate between landscape and portrait modes.
• Quick release side grips securely hold the HTC Touch Diamond Pro when in use, and quickly and effortlessly releases it when you are ready to go.
• Flexible gooseneck extends from cupholder base to provide precise customer selected viewer angle.

This Car Mounts give to us some advantages, like this :
1. Very Pleased
HTC Touch Diamond Pro Car Cup Holder - Gomadic BrandI I have been looking for a good quality mount for my HTC Touch Pro. I've shopped at local store and couldn't find anything of good quality. So I ordered this from Amazon. It is very good quality, very well made, easy to use and very sturdy. My girlfrined has the same phone an I will be ordering another one.

2.

Need more appointment... ?

More information by clicking here.

Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for Sprint HTC EVO 4G LTE, HTC Evo 3D, HTC Evo 4G (A9292 / Supersonic), HTC EVO Design 4G

Cheap Fonus Universal Rotating Car Mount Lighter Socket Dock Holder with Charging USB Port for Sprint HTC EVO 4G LTE, HTC Evo 3D, HTC Evo 4G (A9292 / Supersonic), HTC EVO Design 4G


Phone Holder Series provide safe and secure solution for your PDA Smartphone or any handheld, devices. Slide arms of the holder can be adjusted for universal fitting of a desired device. A USB charging port allows you to charge your device, getting rid of need for a separate car charger. It plugs into any cigarette lighter or 12-volt power receptacle and tightens instantly with a clockwise turn. The neck, made of flexible aluminum, can be adjusted to optimize viewing.Cigarette lighter car phone ...

• Fonus Universal Car holder with charging usb port for most smartphones. Adjustable to fit most smartphones. Flexible long neck can be twisted and bended to position the holder at easy to reach positions.
• Modern design with adjustable gooseneck. Holder rotates 360 degrees. USB charging port with high efficiency. Flexible goose-neck arm.
• Able to connect adapter through lighter socket connection (12/24V DC). Phone can be used during charging. USB Cable sold separately and NOT included.

This Car Mounts give to us some advantages, like this :
1. Works or me.
Like the fact that it rotates..also holds my HTC EVO lte in place even with the case on. Other products didn't fit.

2. cheap
Cool idea!. Worked great. Until the clip broke! It won't hold my phone anymore. Great price but very cheap product.

Need more appointment... ?

More information by clicking here.